Put On The Headphones; Transport; Cleaning; Storage - Silvercrest SKBT 4 B2 Operating Instructions Manual

5.8

Put on the headphones

1. Put on the headphones in such a way that the marking R is on the right
and L is on the left.
2. Figure B: adjust the size of the headphones to your head size using
the two adjustable headphone earcups 4 and 9 by pulling out or push-
ing in both handles 2.
3. Set the volume at the sound source or the headphones. Make absolutely
sure that you are still able to hear the ambient noise.

6. Transport

The headphones can be folded to save space and transported with the sup-
plied transport bag.
1. Figures B+C: place the headphone earcups 4 and 9 in the position
shown in Figure C by pushing them in.
2. Figure D: fold the headphone earcups 4 and 9 inwards into the head-
set 1.

7. Cleaning

WARNING! Risk of material damage!
Protect the device from water drops and water splashes.
Do not use any sharp or abrasive cleaning agents.
• If necessary, clean the device with a soft, damp cloth.

8. Storage

• When no longer using the device, store it in a place where neither high
temperatures nor moisture can affect it.
• Charge the battery before storing the device away for a prolonged pe-
riod. Please note that if the device is stored for too long, this may re-
duce the battery capacity. Avoid a deep discharge of the battery.
15
GB