Charging The Battery - Silvercrest SKBT 4 B2 Operating Instructions Manual

5.1

Charging the battery

1. Connect the Micro USB plug of the USB charger cable 14 to the Micro USB
port 15 of the device. If the headphones were switched on, they are
switched off if the Micro USB plug is plugged in.
2. Connect the USB A plug of the USB charger cable 14 with a USB pow-
er unit (min. 750 mA, not included in the items supplied). All of the
LEDs 16 are lit steadily, if the battery is fully charged.
Remaining runtime of battery
• Press the button
charging state of the battery ...
... displayed optically via the LEDs 16 (the fewer LEDs are lit the short-
er the remaining runtime) and
... announced:
LED indication / Indication in English
"Between fifteen and twenty hours play time"
"Between ten and fifteen hours play time"
"Between five and ten hours play time"
"Between one and five hours play time"
"Less than one hour play time"
"Less than thirty minutes play time"
"Recharge headphone, power off"
10
GB
20 briefly with the device switched on to have the
Meaning
15–20 hours remaining
runtime
10–15 hours remaining
runtime
5–10 hours remaining
runtime
1–5 hours remaining
runtime
Less than 1 hour remaining
runtime
Less than 30 minutes
remaining runtime
Headphones switch off,
charge battery