Playing Music Back Using The Cable; Calls Via Cable - Silvercrest SKBT 4 B2 Operating Instructions Manual

5.6

Playing music back using the cable

NOTE: a playback via a cable, this connection has priority over the Bluetooth
connection. A possibly existing Bluetooth connection will be interrupted when
the 3.5 mm jack cable 10 is plugged in.
Button
Button 12 at the
3.5 mm jack cable 10
1. The 3.5 mm jack cable 10 has 2 different jacks. Insert the 4-pole
jack 13 into the headphone socket of the sound source (e.g. smart-
phone, MP3 player) and the 3-pole jack 8 into the jack socket 7 on the
device.
2. Switch on the audio device.
3. Start playback on the audio device. The sound is reproduced via the
headphones.
4. Use the button 12 at the 3.5 mm jack cable 10 to select and control
the music track. The volume is controlled via the audio device.
5.7

Calls via cable

1. Briefly press the button 12 at the 3.5 mm jack cable 10 to pick up the
call.
2. Adjust the volume during the phone call via the smartphone.
3. Press the button 12 briefly during the phone call to end the call. If you
have accepted the call while the music was playing, the song will con-
tinue to be played after ending the phone call.
14
GB
while playing back:
• press briefly: Pause / Play
• press briefly 2x: next song
• press briefly 3x: previous song
• press long: start language assistant of a con-
nected smartphone
during a call:
• press briefly: pick up / end call
• press long: reject call
Function