Bosch Access Modular Controller 2 Installation Manual page 29

Access Modular Controller 2
If using locally manufactured products, please ensure that the specifications of the product
are identical with the those listed above.
A complete connection diagram of the relay output connectors is shown in Connecting
Diagrams, page 41.
Figure 4.17: Recovery diode schematic
1
2
3
4
Notice!
Risk of damage to equipment
Do not connect externally powered devices in wet mode. This can damage the AMC2-4R4.
Bosch Access Systems B.V.
– Flare move 12DC1W10A
– Flare move 24DC1W16A
normally open/normally closed
common
load
diode
Installation manual
Installing | en
1 normally open/normally
closed
2 common
3 load
4 diode
5 voltage source
29
2020-01 | V02 |