Specifications; Specifications - Toro Groundsmaster 3500 30807 Service Manual

Specifications

Item
Piston Pump (Hydrostat)
Charge Relief Pressure
Traction Circuit Relief Pressure (Forward Only)
Maximum Displacement
Gear Pump
Displacement Section 1 (P1)
Displacement Section 2 (P2)
Wheel Motors (see note)
Front Wheel Motor Displacement
Rear Wheel Motor Displacement
Mow Circuit Relief Pressure
Cutting Unit Motor
Cross−over Relief Pressure
Displacement
Steering Control Valve
Maximum Displacement
Implement (Steering and Lift) Relief Valve Pressure
Hydraulic Filter
Hydraulic Fluid
Hydraulic Tank
NOTE: The three wheel motors are similar in construction with only minor differences. The right front wheel motor and rear wheel motor have a
reverse timed manifold, and the front left wheel motor does not. The end cover of the rear motor has a check valve consisting of a ball and spring,
and both front motors lack this feature.
Hydraulic System Page 5 − 2
Variable displacement piston pump
100 to 150 PSI (6.9 to 10 Bar)
3500 PSI (241.3 Bar)
1.44 cu. in./rev (23.6 cc/rev)
2 stage fixed displacement gear type pump
0.95 cu. In./rev (15.65 cc/rev)
0.33 cu. in./rev (5.34 cc/rev)
Orbital geroller motor
12 cu. in./rev (195 cc/rev)
24.7 cu. in./rev (405 cc/rev)
3200 PSI (221 Bar)
1813 PSI (125 Bar)
1.16 cu. in./rev (19 cc/rev)
Distributor valve with rotary meter
6.10 cu. in./rev (100.0 cc/rev)
1000 PSI (69 Bar)
10 Micron, spin−on cartridge type
See Hydraulic System Fluid in this Chapter
6 Gal. U.S. (22.6 L)
Groundsmaster 3500
Description
Gear motor