Flying An Iq 18B; Flying Double Iq 18B - Tannoy PowerDual iQ 18B User Manual

10.1. Flying an iQ 18B

To fly the iQ 18B by itself, the following accessories are required: SR18 Side Rail Kit
and SCB Beam Kit.
The flown system is assembled as shown in Figure 10b. The SR18 side rail kit is
screwed to the side of the cabinet using the screws provided (1). The SCB Beam Kits
are then placed above and below the speaker ( 2 ). The Lynch Pin is inserted into the
holes of the side rail kit top and bottom ( 3) and the Pin folded to secure it in place
(Figure 10c).
Figure 10c
Figure 10b

10.2. Flying Double iQ 18B

10