Advertisement
Quick Links
Advertisement
Related Manuals for Tannoy iQ 18B
Summary of Contents for Tannoy iQ 18B
- Page 1 18B PERFORMANCE DATA AND HARDWARE INFORMATION...
- Page 2 NOTES: Dimensions...
- Page 3 Convenient flying points are provided on the iQ 18B which will allow the optional flying equipment to be used, as shown in Figure 10a. In the addition to flying the iQ 18B by itself, it can also be flown in conjunction with Tannoy iQ 10 Mid/High unit. They can also be configured to be flown double.
- Page 4 Flying an iQ 18B To fly the iQ 18B by itself, the following accessories are required: SR18 Side Rail Kit and SCB Beam Kit. The flown system is assembled as shown in Figure 10b. The SR18 side rail kit is screwed to the side of the cabinet using the screws provided (1).
- Page 5 To fly two iQ 18Bs, the following accessories are required: 2 × SR18 Side Rail Kit, 2 × SCB Beam Kit and 1 × JK1 Jointing Kit. The flown system is assembled as shown in Figure 10d. The SR18 side rail kit is screwed to the side of each cabinet using the screws provided (1).
- Page 6 The flown system is assembled as shown in Figure 10e. First, the SR18/10 side rail kit is screwed to the side of both the iQ 18B and iQ 10 cabinets using the screws provided (1). The SCB Beam Kits are placed above and below the speaker assembly (2). The Lynch Pin is inserted into the holes of the side rail kit top and bottom (3) and the Pin folded to secure it in place (Figure 10f).
- Page 7 The flown system is assembled as shown in Figure 10g. First, the SR18/10 side rail kit is screwed to the side of each iQ 18B and iQ 10 cabinet using the screws provided (1). The JK1 Jointing Kit is slotted between two SCB Beam Kits for botht he top and bottom (2).
- Page 8 Anechoic Frequency Response, with TDX2 Controller Impedance Response, Passive...
- Page 9 (3) Unweighted pink noise input, measured at 1m Tannoy operates a policy of continuous research and development. The introduction of new materials or manufacturing methods will always equal or exceed the published specificat ions which Tannoy reserve the right to alter without prior notice.
- Page 10 Claims will not be considered is the serial number has been altered or removed. Work under warranty should only be carried out by a Tannoy Professional dealer or service agent. This warranty in no way affects your statutory rights. For further information, please contact your dealer or distributor in your country.