Advertisement
6. DIMENSIONAL DIAGRAM
• Speaker
196
50
60
• Bracket (standard accessory)
17- ø9
50
100
262
7. SPECIFICATIONS
• Specifications common to both the BS-1030B
Unit: mm
600
150
[Finish]
Note: The design and specifications are subject to change without
• Accessories
and BS-1030W
Enclosure Type
2-way bass-reflex system
Rated Input
30 W
8 Ω
Rated Impedance
High impedance (100 V line):
330 Ω (30 W), 500 Ω (20 W), 670 Ω
(15 W), 1 kΩ (10 W), and 2 kΩ (5 W)
High impedance (70 V line):
170 Ω (30 W), 250 Ω (20 W), 330 Ω
(15 W), 500 Ω (10 W), and 1 kΩ (5 W)
Note: Impedance is changeable by
Sound Pressure
90 dB (1 W, 1 m)
Level
Frequency Response
80 – 20,000 Hz
Internal Speakers
Low frequencies:
12 cm dynamic speaker
High frequencies:
2.5 cm dome tweeter
Operating
– 10°C to +50°C
Temperature Range
Splash-Proof Capability
IP-X3 (when the angle is specified in
vertical or horizontal installation)
Dimensions
196 (w) x 290 (h) x 150 (d) mm
Finish
Refer to the table below.
Weight
2.5 kg (speaker only)
Case:
ABS resin, black, paint
BS-1030B
Grille:
Pre-coated steel plate, black, paint
Bracket: Pre-coated steel plate, black, paint
Case:
ABS resin, white, paint
BS-1030W
Grille:
Pre-coated steel plate, white, paint
Bracket: Pre-coated steel plate, white, paint
notice for improvement.
Bracket .................................................. 1
M5x10 machine screw ........................... 2
M5 plain washer .................................... 2
means of the rotary switch.
Printed in Indonesia
533-06-062-5A
Advertisement
