Basic Tab; Forwarding Tab - Motorola CPEI 25150 User Manual

Basic Tab

Enable UPnP IGD
DMZ IP Address
Be sure to click
Apply

Forwarding Tab

Click ADD to create additional Port Forwarding rules.
Select
Protocol
WAN Port Start
WAN Port End
LAN IP Address
LAN Port Start
LAN Port End
Enabled
Be sure to click
Apply
Port Forwarding Basic Tab Fields
Field or Button
once you have made changes.
Forwarding Tab Fields
Field or Button
once you have made changes.
Description
Enables Universal Plug and Play (UPnP)
Internet Gateway Device (IGD) profile to
allow certain Windows applications to setup
the port forwarding rule dynamically when
NAT is enabled on this device.
Enter the DMZ IP Address.
Description
Select a box when you want to delete the
specific row.
Select TCP (Transmission Control Protocol)
or UDP (User Datagram Protocol).
Enter the beginning port range for external
network access.
Enter the ending port range for external
network access.
Enter the IP address to host the service in
the dotted-decimal format.
Enter the beginning port range for internal
network access.
Enter the ending port range for internal
network access.
Check to enable specific port forwarding.
Section 4: Advanced Configuration 16