Using Optional External Feature Module (Continued)
External Feature Module set as a
Door Intercom/Door Opener Adapter
1
Install External Feature Module.
2
Follow the instructions to set it as a
Door Intercom Adapter.
3
Connect a door intercom speaker to
the Adapter.
4
If you wish, you may connect a mag-
netic door strike to the Adapter.
To answer a door speaker over the
intercom:
1
Place an intercom call to the number
that is flashing in your display.
To adjust the door intercom bell
volume at your telephone:
While the phone is on-hook and idle:
1
Press HOLD.
2
Press PAGE.
3
Press the up and down VOLUME
buttons to set desired door intercom
bell volume.
To unlock a magnetic door lock:
1
Press the memory button that has
been made into a "key" for this door.
Additional Information
You may connect up to four Door Intercom
Adapters to your EPIC system. Connect each
one to a separate door intercom speaker and
assign each a different station number from 23 to
26 (Follow the instructions supplied with the
adapter).
When someone rings a door speaker, its corre-
sponding station indicator will flash at all the
phones. You may answer the door, via the inter-
com, from any station by placing an intercom call
to that station.
You may set the door intercom bell volume at
each phone separately. The lowest volume set-
ting at each telephone is "OFF", so you can eas-
ily turn off the doorbell at particular telephones.
If you choose to connect a magnetic door strike
to the system, you may unlock this door from any
station by pressing the memory button which has
been made into a "key" for this door.
To make a memory button into a "key", press
PROGRAM, then MEM, then the memory button
where you wish to store the door "key". Press
CHANGE, then press FLASH, then HOLD, fol-
lowed by the number of the desired door box
(from "23" to "26"), then press SAVE.
Note: You may press the memory button to
unlock the door at any time. There is no need
to be connected to the door speaker over the
intercom.
67