Setting Up A Telephone As A Centrex Console - TMC EPIC ET4000 User Manual

Setting up a Telephone as a Centrex Console

To set up a telephone as a
Centrex console:
1
Press PROGRAM.
- The display will read "Program..."
2
Press the soft key under NEXT
repeatedly, until "Centrex Console"
appears in the display, and then
press ENTER.
The display will show the current
console setting.
3
Press the soft key under CHANGE
until the desired console setting is
displayed.
The choices are:
Centrex CSL: OFF (factory setting)
Centrex CSL: ON
4
If you have chosen to set the con-
sole ON, then press the soft key
under NEXT repeatedly and the
softkey under CHANGE whenever
you wish, to choose which of the
stations you wish this telephone to
act as a console for.
Note that you may set up multiple
Centrex consoles, and have each of
them be alerted only when the
Centrex lines of particular stations
are ringing
5
Press PROGRAM to exit.
62
Centrex Operation
You may choose to set one or more of your Epic
telephones as a Centrex console. Any phone
that you set as a Centrex console will be alerted
by a short ring when another station's Centrex
line is ringing, and the display will indicate which
phone is ringing by flashing the corresponding
station indicator.
When you set up a Centrex console, you can
decide which stations you wish to act as a con-
sole for. A secretary, for instance, may only wish
to act as a Centrex console for the phone of his
or her boss.
The Centrex console will be alerted that the
other phone is ringing after a certain delay, which
is set at that other phone. Once you get this
alert, you may answer that other station's ringing
line by dialing the Centrex pickup code, followed
by the Centrex telephone number of the line you
want to pick up.
Note that if the other station's ring console set-
ting is set to "NO," the Centrex console will get
no alert.