Using Memory Dial - TMC EPIC ET4000 User Manual

Using Memory Dial

To store a memory dial num-
ber:
1
Press PROGRAM.
- The display will read "Program..."
2
Press the soft key under MEM.
- The display will read "Select
Location"
3
Press the Memory button where you
wish to store the number, or press
LOWER followed by the desired
memory button if you wish to store
the number in a lower memory loca-
tion.
- The display will show the currently
stored number, or indicate "Empty
Location."
4
Press the soft key under CHANGE if
you wish to store a new number.
5
Dial desired telephone number, up
to 32 digits.
6
Press the soft key under SAVE.
Note: If you ever wish to erase the
memory dial numbers stored in your
phone, please follow the instructions
found on page 49.
Memory Dialing
Press Memory
button to dial
numbers in white
spaces
You may store up to 28 telephone numbers at
your telephone which you can dial automatically
with the press of a memory button.
Note that you can enter hyphens in your num-
bers for easy reading, as well as flashes and
pauses (see page 48).
To dial a memory dial number:
1
Press the memory button where the desired
telephone number is stored.
OR
Press LOWER followed by the desired
memory button if you wish to dial a number
stored in a lower memory location.
When you press a memory button, the speaker-
phone turns on automatically, and the number is
dialed out. You may lift the handset or press
HEADSET to switch to a handset or headset call
at any time.
Press LOWER,
then Memory button
to dial numbers in
gray spaces
45