Page 1
Available in both 26.5” square and 49” Full-HD (16:9 aspect ratio), USP displays represent the cutting edge in digital signage displays. www.gpodisplay.com USP265M & USP490M Before operating the unit, please read this manual thoroughly, and retain it for future reference...
Do not remove ground prong from three-pronged plugs. If your outlet will not accept three-pronged plugs, consult an electrician for replacement. 22. Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions 23. This is a Class A digital device www.gpodisplay.com USP265M & USP490M...
Page 3
Video wall USP265M Manual Thank You for Purchasing a USP265M display This manual describes how to use the product and provides safety guidelines and best practices. Please read the manual carefully before installing or using the product. After reading this manual, please retain for future reference. If you have any questions or a problem occurs, please contact either the company you purchased this product from or an authorized service center.
Product Installation Check your installation space Remove any foreign substance or protrusions on the wall where the product will be installed. Dril Screw position mark Place the bracket at the location where the product will be installed and mark it in both holes.
Page 5
- Sleep mode Input • Long click : Power On/Off RS-232 Reset switch Micr SVC2 Port SVC1 SD Slot Port DC Power Input Mini * The SVC port is for factory calibration only. HDMI Sound Out www.gpodisplay.com USP265M & USP490M...
Page 6
Product Installation Check your installation space Remove any foreign substance or protrusions on the wall where the product will be installed. Dril Screw position mark Place the bracket at the location where the product will be installed and mark it in both holes.
Input Source Toggle* (Android Board – HDMI Mode) Loop *When no active HDMI input is detected, the display will revert to the Android board as a source RS232 USP490M USB to RS232 USP265M gender board USB to RS232 cable 4-pin cable Display...
Page 8
Serial Control Protocol RS232 Command Position (4-Pin) www.gpodisplay.com...
Need help?
Do you have a question about the USP265M and is the answer not in the manual?
Questions and answers