Western Digital OpenFlex F3100 User Manual page 77

User Guide
The storage device's Volumes page appears:
Step 3 : From the list of available volumes, identify the one that will used to create the path.
If that volume has been configured to allow any host, a dedicated path cannot be
established between it and a specific host. If this is the case, it will be indicated by the
following:
• The Allow Any Host setting will be toggled to the ON (enabled) position:
• The path arrows beside the Pool ID will be grayed-out, and when the user hovers over
Step 4 : Disable the Allow Any Host setting for that volume by clicking the on/off toggle switch:
The path arrows beside the Pool ID will turn black, and when the user hovers over them,
the tooltip will indicate that path management is now available:
Step 5 : Click the path arrows beside the Pool ID:
them, the tooltip will indicate that any host is allowed:
3. Management
3.1 OCGUI
71