Epson Home Cinema 3200 Series Quick Setup

Home Cinema 3200/3800 Series

Quick Setup

IMPORTANT: Before using this product, make sure you read these instructions
and the safety instructions in the online User's Guide.
Note: These illustrations show the Home Cinema 3800, but the instructions are
the same for the Home Cinema 3200 unless otherwise noted.
Connect the projector
Connect two video devices or computers simultaneously with a commercially
available HDMI cable. Use the Source buttons on the remote control or the
Home and arrow buttons on the projector to switch between them.
Note: The DC Out (2.0A) port provides power to streaming media devices.
For more details and additional connection types, see the online User's Guide.
Connect audio
External speakers
You can connect the projector to external self-powered speakers through the
Audio Out port.
Note: If you connect external speakers to the Home Cinema 3800, the
projector's internal speakers are muted.
Bluetooth devices
®
You can pair a Bluetooth device to the projector to output audio from a
device connected to one of the HDMI ports. See the online User's Guide for
instructions.
Turn on your equipment
1
Turn on your video source or computer.
2
Plug in the projector.
HDMI cable
3.5 mm stereo mini cable
3
Remove the lens cap.
4
Press the power button on the projector or the On button on the
remote control. The power light flashes blue, then stays on.
Note: To shut down the projector, press the
projector or the Standby button on the remote control, then press the
button again to confirm, if necessary. Wait for the projector to cool down
before unplugging it.
5
Use the arrow buttons on the projector or remote control to highlight any
of the options that appear on the Home screen, then press Enter to select
it. You can switch between projection sources and quickly access various
adjustment options from this screen.
6
The default language of the menu system is English. To select another
language, press the Menu button on the projector or remote control.
Select Extended and press Enter. Select Language and press Enter.
Select your language and press Enter. Press the Menu button to exit the
menu system.

Adjust the image

1
If you don't see an image, press one of the Source buttons on the remote
control or the Home and arrow buttons on the projector to select the
image source.
Note: If you still see a blank screen or have other display problems,
see the troubleshooting tips on the back of this sheet.
2
For the best image quality, place the projector directly in front of the
center of the screen, facing the screen squarely. If this is not possible, turn
the horizontal and vertical lens shift dials to adjust the image position and
center it on the screen.
power button on the