Download Print this page

Using The Remote Control; Viewing 3D Images - Epson Home Cinema 3200 Series Quick Setup

Advertisement

3
If the image is tilted, adjust the front feet as shown below.
4
Turn the zoom ring to reduce or enlarge the image.
5
Turn the focus ring to sharpen the image.
6
If your image is uneven on the sides, you can use the keystone correction
feature to adjust the image. To use this feature, you must first set the lens
to the center-top position using the lens shift dials.
Press the
or
button on the projector to display the keystone
correction screen. Press the
or
button (Home Cinema 3800) to correct for horizontal keystone
distortion. Press the
or
distortion.
Home Cinema 3200
Home Cinema 3800
or
button (Home Cinema 3200), or the
button to correct for vertical keystone

Using the remote control

Make sure the batteries are installed as shown (two AA batteries).
Turn projector on
Choose which source
to display
Display a test pattern
for image focusing
Control connected
sources with HDMI Link
Display HDMI Link menu
Display Dynamic Range
menu
Access projector menus
For more information on using the remote control, see the online
User's Guide.

Viewing 3D images

To view 3D content, you must first connect a 3D-compatible video device to
one of the HDMI ports on your projector. You will also need a pair of Epson
(part number V12H548006) or Epson-compatible RF 3D active shutter glasses.
1
Turn on and begin playback on the 3D-compatible video device.
Note: Make sure you set the video device to play content in 3D mode.
2
Press the 3D Format button on the remote control, if necessary.
3
Slide the power switch on your 3D glasses to the On position.
Note: If the glasses don't automatically display 3D content, you may
need to pair them with the projector. Move the glasses within 10 feet
(3 m) of the projector, then press and hold the Pairing button on the
3D glasses for at least 3 seconds. The status light on the glasses will
alternately flash green and red, then remain green for 10 seconds if
pairing is successful.
See the online User's Guide for more information on adjusting 3D images.
Turn projector off
Display Home screen
Temporarily mute audio
and video
Mute audio
Adjust volume
Change the color mode
Navigate projector
menus
®

Advertisement

loading

This manual is also suitable for:

Home cinema 3800 series