Epson PowerLite Home Cinema 3000 User Manual
  1. Manuals
  2. Brands
  3. Epson Manuals
  4. Projector
  5. PowerLite Home Cinema 3000
  6. User manual

Epson PowerLite Home Cinema 3000 User Manual

Hide thumbs Also See for PowerLite Home Cinema 3000:
Table of Contents

Advertisement

Quick Links

®
PowerLite
Home Cinema
3000/3500/3510/3600e User's Guide

Advertisement

Table of Contents
loading

Related Manuals for Epson PowerLite Home Cinema 3000

Summary of Contents for Epson PowerLite Home Cinema 3000

  • Page 1 ® PowerLite Home Cinema 3000/3500/3510/3600e User's Guide...

  • Page 3: Table Of Contents

    Contents PowerLite Home Cinema 3000/3500/3510/3600e User's Guide..............9 Introduction to Your Projector ......................... 10 Projector Features..........................10 Product Box Contents........................11 Additional Components ........................ 12 Optional Equipment and Replacement Parts................. 13 Warranty and Registration Information ..................14 Notations Used in the Documentation ....................14 Where to Go for Additional Information ....................
  • Page 4 Connecting to a Computer for Sound..................36 Connecting to External Speakers ....................36 Connecting to External USB Devices .................... 37 USB Device Projection......................37 Connecting a USB Device or Camera to the Projector.............. 38 Selecting the Connected USB Source ..................38 Disconnecting a USB Device or Camera From the Projector ............
  • Page 5 Changing the Projection Mode Using the Menus................64 Image Aspect Ratio ..........................65 Changing the Image Aspect Ratio ....................66 Available Image Aspect Ratios ...................... 66 Color Mode............................67 Changing the Color Mode......................67 Available Color Modes........................68 Turning On Auto Iris........................69 Using Picture in Picture ........................
  • Page 6 Image Quality Settings - Image Menu ....................92 Input Signal Settings - Signal Menu....................94 Projector Feature Settings - Settings Menu..................98 Projector Memory Options - Memory Menu..................103 Projector Network Settings - Network Menu..................104 Projector Information Display - Info Menu ..................105 Event ID Code List........................
  • Page 7 Solutions When the Image is Fuzzy or Blurry ................135 Solutions When the Image Brightness or Colors are Incorrect ............ 136 Solutions When a 3D Image Does Not Display Correctly ............137 Solutions When a WirelessHD Source Does Not Display Correctly..........138 Solutions to Sound Problems ......................

  • Page 9: Powerlite Home Cinema 3000/3500/3510/3600E User's Guide

    PowerLite Home Cinema 3000/3500/3510/3600e User's Guide Welcome to the PowerLite Home Cinema 3000/3500/3510/3600e User's Guide. Note: The availability of models may vary by region.

  • Page 10: Introduction To Your Projector

    The PowerLite Home Cinema 3000, 3500, 3510, and 3600e projectors include these special features: Bright, high-resolution projection system • PowerLite Home Cinema 3000: Up to 2300 lumens of color brightness (color light output) and 2300 lumens of white brightness (white light output)

  • Page 11: Product Box Contents

    Easy-to-use setup and operation features • Vertical and horizontal lens shift dials for flexible projector placement • 1.6× optical zoom ratio for improved zooming capability Note: The PowerLite Home Cinema 3600e projector is shown in most illustrations in this manual, unless noted otherwise.

  • Page 12: Additional Components

    • To receive a component video signal, you need a compatible component cable. You can purchase one from Epson or an authorized Epson reseller. • To receive an HDMI signal, you need a compatible HDMI cable. You can purchase one from Epson or an authorized Epson reseller.

  • Page 13: Optional Equipment And Replacement Parts

    Related references Optional Equipment and Replacement Parts Optional Equipment and Replacement Parts You can purchase screens, other optional accessories, and replacement parts from an Epson authorized reseller. To find the nearest reseller, call 800-GO-EPSON (800-463-7766). Or you can purchase online epsonstore.com (U.S.

  • Page 14: Warranty And Registration Information

    In addition, Epson offers free Extra Care Home Service. In the unlikely event of an equipment failure, you won’t have to wait for your unit to be repaired. Instead, Epson will ship you a replacement unit anywhere in the United States, Canada, or Puerto Rico. See the Extra Care Home Service brochure for details.

  • Page 15: Projector Part Locations

    • For detailed instructions on using your projector in a network environment, see the EasyMP Network Projection Operation Guide. • If you still need help after checking this manual and the sources listed above, you can use the Epson PrivateLine Support service to get help fast. For details, see "Where to Get Help".
  • Page 16 Lamp cover Exhaust vent Focus ring Lens cap Lens Zoom ring Remote receiver Front adjustable foot Air filter cover and vent Vertical lens shift dial Horizontal lens shift dial Control panel Parent topic: Projector Part Locations...

  • Page 17: Projector Parts - Rear

    Projector Parts - Rear Speakers (PowerLite Home Cinema 3500/3510/3600e) AC input port Trigger out port RS-232C port Audio ports (PowerLite Home Cinema 3500/3510/3600e) Component ports Security cable attachment point Audio Out port (PowerLite Home Cinema 3500/3510/3600e) Cable holder Remote receiver USB Type A port...

  • Page 18: Projector Parts - Base

    Service port Video port HDMI 2 port PC port HDMI 1/MHL (PowerLite Home Cinema 3500/3510/3600e) or HDMI 1 (PowerLite Home Cinema 3000) port Parent topic: Projector Part Locations Related tasks Installing a Security Cable Projector Parts - Base Front adjustable feet Mounting bracket holes Intake vent Parent topic:...

  • Page 19: Projector Parts - Control Panel

    Projector Parts - Control Panel Lamp light Status light Power button/light Source button (cycles through the list of sources) Volume control buttons, horizontal keystone adjustment buttons (adjust screen shape), and arrow buttons Vertical keystone adjustment buttons (adjust screen shape) and arrow buttons Brightness sensor Esc button (cancels/exits functions) Enter button (selects options)

  • Page 20: Projector Parts - Remote Control

    Projector Parts - Remote Control On button (turns on projector) P-in-P button (controls the Picture-in-Picture mode) Source buttons (select specific video input sources)
  • Page 21 HDMI Link button (displays the settings menu for HDMI Link) Link Menu button (displays the main menu of the connected device) Control buttons (control playback and other features of connected devices that support the HDMI CEC or MHL standard) 3D Format button (changes the 3D format) Arrow buttons (move though on-screen options) Default button (returns selected setting to default value) Menu button (accesses projector menu system)
  • Page 22 Mute button (turns off sound only; PowerLite Home Cinema 3500/3510/3600e) Illumination button (temporarily lights the remote control buttons) Standby button (turns off the projector) Parent topic: Projector Part Locations...

  • Page 23: Setting Up The Projector

    Setting Up the Projector Follow the instructions in these sections to set up your projector for use. Projector Placement Projector Connections Installing Batteries in the Remote Control Projector Placement You can place the projector on almost any flat surface to project an image. You can also install the projector in a ceiling mount if you want to use it in a fixed location.
  • Page 24 Rear Front Ceiling Rear Ceiling Wherever you set up the projector, make sure to position it squarely in front of the center of the screen, not at an angle, if possible. If the projector cannot be centered in front of the screen, use lens shift to reposition the image instead of using keystone correction for better image quality.

  • Page 25: Projection Distance

    Parent topic: Projector Placement Related references Projector Feature Settings - Settings Menu Projection Distance The distance at which you place the projector from the screen determines the approximate size of the image. The image size increases the farther the projector is from the screen, but can vary depending on the zoom factor, aspect ratio, and other settings.
  • Page 26 Horizontal lens shift adjustment Screen or image size Distance between projector and screen Distance from center of lens to bottom of the projected image when the lens is shifted to the highest position Distance from center of lens to bottom of the projected image when the lens is shifted to the lowest position Distance the projected image moves from the center when the lens is shifted to its maximum position left or right...
  • Page 27 Screen or image size (1) Projection distance (2) Wide to Tele 40 inches (101.6 cm) 46 to 75 inches (116 to 190 cm) 60 inches (152.4 cm) 69 to 113 inches (176 to 286 cm) 80 inches (203.2 cm) 93 to 150 inches (235 to 382 cm) 100 inches (254 cm) 116 to 188 inches...
  • Page 28 Screen or image size (1) Projection distance (2) Wide to Tele 40 inches (101.6 cm) 56 to 92 inches (143 to 233 cm) 60 inches (152.4 cm) 85 to 138 inches (216 to 351 cm) 80 inches (203.2 cm) 114 to 184 inches (288 to 468 cm) 100 inches (254 cm) 142 to 231 inches...

  • Page 29: Projector Connections

    Projector Connections You can connect the projector to a variety of computer, video, and audio sources to display presentations, movies, or other images, with or without sound (audio available only for PowerLite Home Cinema 3500/3510/3600e). • For video projection, connect devices such as DVD players, gaming consoles, streaming devices, digital cameras, smartphones, and tablets with compatible video output ports.

  • Page 30: Removing And Attaching The Cable Cover

    Removing and Attaching the Cable Cover Before you can connect equipment to your projector, you need to remove the cable cover (PowerLite Home Cinema 3600e). Use coins or your fingernails to lift up and out on the gaps at the bottom of the cable cover, then remove the cable cover.

  • Page 31: Connecting To An Mhl-Compatible Device

    2. Connect the other end to one of the projector's HDMI ports. Note: If you connected a game console, it may take a few seconds for your image to appear when you switch to the game console's input source. To reduce the potential lag in response time to game commands, set your game console's output format to a progressive signal of 480p, 720p, or higher.

  • Page 32: Connecting To A Component Video Source

    3. Connect the other end of the cable to projector's HDMI 1/MHL port or the WirelessHD transmitter's HDMI 5 / MHL (IN) port. Parent topic: Connecting to Video Sources Connecting to a Component Video Source If your video source has component video ports, you can connect it to the projector using an optional component video cable.

  • Page 33: Connecting To A Composite Video Source

    Note: If you connected a game console, it may take a few seconds for your image to appear when you switch to the game console's input source. To reduce the potential lag in response time to game commands, set your game console's output format to a progressive signal of 480p, 720p, or higher. See your game console documentation for instructions.

  • Page 34: Connecting To Computer Sources

    Note: If you connected your video source to the projector using an HDMI or MHL cable, the audio signal is transferred with the video signal; you do not need an additional cable for sound. 1. Connect the audio cable to your video source's audio-out ports. 2.

  • Page 35: Connecting To A Computer For Hdmi Video And Audio

    1. If necessary, disconnect your computer's monitor cable. 2. Connect the VGA computer cable to your computer's monitor port. 3. Connect the other end to a PC port on the projector. 4. Tighten the screws on the VGA connector. Parent topic: Connecting to Computer Sources Related tasks Connecting to a Computer for Sound...

  • Page 36: Connecting To A Computer For Sound

    Parent topic: Connecting to Computer Sources Connecting to a Computer for Sound If your computer presentation includes sound and you did not connect it using the projector's HDMI port, you can still play sound through the projector's speaker system (PowerLite Home Cinema 3500/3510/3600e).

  • Page 37: Connecting To External Usb Devices

    4. Connect the stereo mini-jack end of the cable to your projector's Audio Out port. Parent topic: Projector Connections Connecting to External USB Devices Follow the instructions in these sections to connect external USB devices to the projector. USB Device Projection Connecting a USB Device or Camera to the Projector Selecting the Connected USB Source Disconnecting a USB Device or Camera From the Projector...

  • Page 38: Connecting A Usb Device Or Camera To The Projector

    • Formatted in FAT or FAT32 • Self-powered by their own AC power supplies (bus-powered hard drives are not recommended) • Avoid using hard drives with multiple partitions You can project slide shows from image files on a connected USB device or memory card reader. Parent topic: Connecting to External USB Devices Related references...

  • Page 39: Disconnecting A Usb Device Or Camera From The Projector

    2. Press the USB/LAN button on the remote control. 3. Press the button again to cycle through other USB sources, if available. Parent topic: Connecting to External USB Devices Disconnecting a USB Device or Camera From the Projector When you finish presenting with a connected USB device or camera, you must prepare to disconnect the device from the projector.
  • Page 40 2. Insert the batteries with the + and – ends facing as shown. 3. Replace the battery cover and press it down until it clicks into place. Warning: Dispose of used batteries according to local regulations. Do not expose batteries to heat or flame.

  • Page 41: Wireless Network Projection

    • EasyMP Network Projection software sets up your computer for wireless network projection. Go to epson.com/support (U.S.) or epson.ca/support (Canada) and select your projector. • Projection from iOS or Android devices with the wireless LAN module and free Epson iProjection app; visit epson.com/projectorapp (U.S.) or epson.ca/projectorapp...

  • Page 42: Selecting Wireless Network Settings Manually

    Insert the wireless LAN module into the USB Type A port. The light on the wireless LAN module turns on when the module is installed and operating. The light flashes when the module is communicating over the network. Parent topic: Wireless Network Projection Related references Optional Equipment and Replacement Parts...
  • Page 43 3. Select the Network menu and press Enter. 4. Select Network Configuration and press Enter. 5. Select the Basic menu and press Enter. 6. Select the Projector Name setting and enter a name up to 16 alphanumeric characters long to identify the projector over the network.

  • Page 44: Wireless Lan Menu Settings

    7. Select the Wireless LAN menu and press Enter. 8. Select the settings on the Wireless LAN menu as necessary for your network. Note: Some items may be unavailable if Quick or Advanced connection mode is selected. 9. When you finish selecting settings, select Complete and follow the on-screen instructions to save your settings and exit the menus.
  • Page 45 Setting Options Description Connection Mode Quick Selects the type of wireless connection: Advanced Quick: lets you quickly connect to one computer, smartphone, or tablet Advanced: lets you connect a wireless network access point Channel In Quick connection mode, selects the frequency band (channel) used by the wireless 11ch SSID...

  • Page 46: Selecting Wireless Network Settings In Windows

    Selecting Wireless Network Settings in Windows Before connecting to the projector, select the correct wireless network on your computer. 1. To access your wireless utility software, access the Desktop and double-click the network icon on the Windows taskbar. 2. Do one of the following: •...

  • Page 47: Wireless Security Menu Settings

    4. Select the Security menu and press Enter. 5. Select the security settings for your network. 6. When you finish selecting settings, select Complete and follow the on-screen instructions to save your settings and exit the menus. Wireless Security Menu Settings Parent topic: Wireless Network Projection Wireless Security Menu Settings...

  • Page 48: Using Basic Projector Features

    Using Basic Projector Features Follow the instructions in these sections to use your projector's basic features. Turning On the Projector Turning Off the Projector Viewing 3D Images Selecting the Language for the Projector Menus Adjusting the Image Height Adjusting the Image Position Using Lens Shift Image Shape Resizing the Image with the Zoom Ring Focusing the Image Using the Focus Ring...
  • Page 49 1. Remove the projector's lens cover. 2. Connect the power cord to the projector's power inlet. 3. Plug the power cord into an electrical outlet. Note: With Direct Power On turned on, the projector turns on as soon as you plug it in. The projector's power light turns blue.

  • Page 50: Turning Off The Projector

    Warning: Never look into the projector lens when the lamp is on. This can damage your eyes and is especially dangerous for children. If you do not see a projected image right away, try the following: • Turn on the connected computer or video device. •...

  • Page 51: Viewing 3D Images

    You can view 3D images using your projector. Viewing 3D images requires a 3D-compatible video device and a pair of Epson RF 3D glasses (not included with PowerLite Home Cinema 3000). You can also convert 2D images to 3D using the 2D-to-3D Conversion setting in your projector's Signal > 3D...
  • Page 52 You can purchase Epson RF 3D glasses from an Epson authorized reseller. To find the nearest reseller, call 800-GO-EPSON (800-463-7766). Or you can purchase online at epsonstore.com (U.S. sales) or epson.ca (Canadian sales). 1. Connect a 3D-compatible video device to the projector using a compatible HDMI cable.

  • Page 53: Pairing The 3D Glasses With The Projector

    3D Viewing Range Parent topic: Using Basic Projector Features Pairing the 3D Glasses with the Projector Pair the glasses with the projector to establish communication between them for 3D viewing. 1. Turn on the projector. 2. Set the image source to HDMI. 3.

  • Page 54: Charging The 3D Glasses

    Charging the 3D Glasses Charge the glasses when the status light on the glasses flashes red to indicate a low battery. 1. Connect the smaller end of the charging cable to the port on the bridge of the glasses. Note: Make sure you connect the cable in the correct orientation or you may damage the glasses or cable.

  • Page 55: 3D Viewing Range

    3D Viewing Range When you view 3D images, make sure you are positioned within the viewing range shown here. 32 ft (10 m) Parent topic: Viewing 3D Images Selecting the Language for the Projector Menus If you want to view the projector's menus and messages in another language, you can change the Language setting.

  • Page 56: Adjusting The Image Height

    3. Select the menu and press Enter. 4. Select the Language setting and press Enter. 5. Select the language you want to use and press Enter. 6. Press Menu or Esc to exit the menus. Parent topic: Using Basic Projector Features Adjusting the Image Height If you are projecting from a table or other flat surface, and the image is too high or low, you can adjust the image height using the projector's adjustable feet.

  • Page 57: Adjusting The Image Position Using Lens Shift

    3. Use the vertical and horizontal lens shift dials on the projector to adjust the position of the projected image as necessary. If the projected image is unevenly rectangular, you need to adjust the image shape. Parent topic: Using Basic Projector Features Related concepts Image Shape Related tasks...
  • Page 58 2. Turn the vertical and horizontal lens shift dials on the projector to adjust the position of the projected image as necessary. Center of lens Projected image when lens shift is set in the center V × 60%...

  • Page 59: Image Shape

    H × 24% Note: You cannot move the image to both the horizontal and vertical maximum values. Follow these guidelines when using lens shift to adjust your images: • When adjusting the image height, position the image lower than where you want it to be and then move it up using the vertical lens shift dial.
  • Page 60 2. Press one of these keystone buttons on the control panel to display the Keystone adjustment screen. 3. Press a keystone button on the projector's control panel to adjust the image shape. After correction, your image is slightly smaller. Note: If the projector is installed out of reach, you can also correct the image shape with the remote control using the H/V-Keystone settings in the projector menus.

  • Page 61: Resizing The Image With The Zoom Ring

    Resizing the Image with the Zoom Ring 1. Turn on the projector and display an image. Wait 30 minutes after turning on the projector before setting the focus, zoom, and lens shift for maximum accuracy. Note: You can display a pattern to aid in adjusting the projected image using the Pattern button on the remote control.

  • Page 62: Remote Control Operation

    2. To sharpen the image focus, rotate the projector’s focus ring. Parent topic: Using Basic Projector Features Remote Control Operation The remote control lets you control the projector from almost anywhere in the room. You can point it at the screen, or the front or back of the projector. Make sure that you aim the remote control at the projector's receivers within the distance and angles listed here.

  • Page 63: Selecting An Image Source

    Horizontal 32 feet (10 m) ± 30° Note: Avoid using the remote control in conditions with bright fluorescent lights or in direct sunlight, or the projector may not respond to commands. If you will not use the remote control for a long time, remove the batteries.

  • Page 64: Projection Modes

    • Press the button for the source you want on the remote control. If there is more than one port for that source, press the button again to cycle through the sources. HDMI port sources Component source Composite video source USB and network port sources WirelessHD sources (PowerLite Home Cinema 3600e) PC port (VGA) source...

  • Page 65: Image Aspect Ratio

    1. Turn on the projector and display an image. 2. Press the Menu button. 3. Select the Settings menu and press Enter. 4. Select the Projection setting and press Enter. 5. Select a projection mode and press Enter. 6. Press Menu or Esc to exit the menus. Parent topic: Projection Modes Image Aspect Ratio...

  • Page 66: Changing The Image Aspect Ratio

    Changing the Image Aspect Ratio You can change the aspect ratio of the displayed image to resize it. Note: For HDMI sources, the input signal determines the image's aspect ratio. 1. Turn on the projector and switch to the image source you want to use. 2.

  • Page 67: Color Mode

    Aspect ratio setting Description Full Displays images using the full width of the projection area, but does not maintain the aspect ratio. Note: The Auto aspect ratio setting is available only for HDMI, component, and WirelessHD image sources. Parent topic: Image Aspect Ratio Color Mode The projector offers different Color Modes to provide optimum brightness, contrast, and color for a...

  • Page 68: Available Color Modes

    3. Press the Color Mode button on the remote control to change the Color Mode. A list of available Color Modes appears. 4. To cycle through all the available Color Modes for your input signal, press the up or down arrow button.

  • Page 69: Turning On Auto Iris

    Parent topic: Color Mode Turning On Auto Iris In certain color modes, you can turn on the Auto Iris setting to automatically optimize the image based on the brightness of the content you project. 1. Turn on the projector and switch to the image source you want to use. 2.

  • Page 70: Available Picture In Picture Options

    Note: You cannot use Picture in Picture while projecting 3D images or when Image Processing is set to Fast in the Signal menu. 1. Press the P-in-P button on the remote control. The second HDMI video source appears as a sub-screen in the corner of the image. Note: While Picture in Picture mode is active, press the Menu button on the remote control to adjust the size and position of the sub-screen.

  • Page 71: Controlling The Volume With The Volume Buttons

    Parent topic: Using Picture in Picture Controlling the Volume with the Volume Buttons You can use the Volume buttons on the projector or the remote control to adjust the volume as you project a presentation with audio. The volume buttons control the projector’s internal speaker system or any external speakers you connected to the projector (PowerLite Home Cinema 3500/3510/3600e).

  • Page 72: Supported Slideshow File Types

    Related concepts USB Device Projection Related tasks Connecting a USB Device or Camera to the Projector Supported Slideshow File Types You can project these types of files using the projector's Slideshow feature. Note: For best results, place your files on media that is formatted in FAT16/32. File contents File type Details...
  • Page 73 1. Press the USB/LAN button on the projector remote control. The Slideshow screen appears. 2. Do the following as necessary to locate your files: • If you need to display files inside a subfolder on your device, press the arrow buttons to highlight the folder and press the Enter button.

  • Page 74: Slideshow Display Options

    5. To stop the display, follow the on-screen instructions or press the Esc button. Slideshow Display Options Parent topic: Projecting a Slide Show Related tasks Connecting a USB Device or Camera to the Projector Disconnecting a USB Device or Camera From the Projector Slideshow Display Options You can select these display options when using the projector's Slideshow feature.
  • Page 75 Setting Options Description Screen Switching Does not display the next file automatically Time 1 Second to 60 Seconds Displays files for the selected time and switches to the next file automatically; high resolution images may switch at a slightly slower rate Effect Wipe Transitions between images with a wipe effect...

  • Page 76: Adjusting Projector Features

    Adjusting Projector Features Follow the instructions in these sections to use your projector's feature adjustments. Shutting Off the Picture and Sound Temporarily Adjusting the Color Convergence (Panel Alignment) Saving Settings to Memory and Using Saved Settings Projector Security Features Shutting Off the Picture and Sound Temporarily You can temporarily turn off the projected picture and sound if you want to redirect your audience's attention during a presentation.
  • Page 77 1. Turn on the projector. 2. Press the Menu button. 3. Select the Settings menu and press Enter. 4. Select the Panel Alignment setting and press Enter. 5. Select the Panel Alignment setting and press Enter. 6. Select On and press Enter. 7.
  • Page 78 You see this screen: 11. Press Enter. You see a screen like this: 12. Use the arrow buttons on the remote control to adjust the color alignment of the color you selected for the Select Color setting. Note: Your adjustments affect the gridlines in the entire screen. You can fine-tune your adjustments by continuing with the next steps.
  • Page 79 You see this screen: 14. Select Adjust the four corners and press Enter. 15. Use the arrow buttons on the remote control to adjust the color alignment in the corner of the screen highlighted by the orange box. 16. Press the Enter button to move to the next corner of the screen. 17.

  • Page 80: Saving Settings To Memory And Using Saved Settings

    You see this screen: 18. Do one of the following: • If your projector's panel alignment is now correct, select Exit and press Enter to return to the Panel Alignment menu. • If your projector needs additional panel alignment, select Select intersection and adjust and press Enter.

  • Page 81: Projector Security Features

    3. You see this screen: 4. Select one of the following options: • Load Memory: Overwrites your current settings with saved settings • Save Memory: Saves your current settings to memory (10 memories with different names are available) Note: A memory name that has already been used is indicated by a blue mark. Saving over a previously saved memory overwrites the settings with your current settings.

  • Page 82: Locking The Projector's Buttons

    • Security cabling to physically cable the projector in place. Locking the Projector's Buttons Installing a Security Cable Parent topic: Adjusting Projector Features Locking the Projector's Buttons You can lock the buttons on the projector's control panel to prevent anyone from using the projector. Note: You can use the remote control to control the projector when the control panel buttons are locked.

  • Page 83: Unlocking The Projector's Buttons

    Related references Projector Feature Settings - Settings Menu Installing a Security Cable You can use the security slot on the back of the projector to attach a Kensington Microsaver Security system, available from Epson. Parent topic: Projector Security Features Related references...

  • Page 84: Using Wirelesshd

    Using WirelessHD You can use the included WirelessHD transmitter to wirelessly stream HD content from a video device to the projector (PowerLite Home Cinema 3600e). WirelessHD Transmitter Parts WirelessHD Transmitter Placement Connecting the WirelessHD Transmitter Viewing WirelessHD Content Switching WirelessHD Sources Using the WirelessHD Picture in Picture Feature WirelessHD Transmitter Parts power button (turns the transmitter on or off)

  • Page 85: Wirelesshd Transmitter Placement

    HDMI (OUT) port (connects to display devices such as a television) HDMI input ports (connect to your input devices; HDMI/MHL port on the side of transmitter) 3D glasses charging port (connects a USB cable to charge the 3D glasses) Setup button (press for 5 seconds to reset the transmitter's settings) power light (lights green when transmitter is operating or turned on;...
  • Page 86 1. Plug the AC adapter into the AC input port on the WirelessHD transmitter and into an electrical outlet. 2. Connect HDMI cables to your video devices and to the HDMI input ports on the side and back of the WirelessHD transmitter.

  • Page 87: Viewing Wirelesshd Content

    3. To use the WirelessHD transmitter as a pass-through device to a television or other display, connect an HDMI cable to the display device and to the HDMI (OUT) port on the back of the transmitter. Parent topic: Using WirelessHD Viewing WirelessHD Content You can project content wirelessly from any device connected to the WirelessHD transmitter.

  • Page 88: Switching Wirelesshd Sources

    Switching WirelessHD Sources If you have connected multiple HDMI input sources to your WirelessHD transmitter, you can use the projector remote control to switch between sources. 1. Aim the remote control at the WirelessHD transmitter. 2. Press the Input button on the remote control or the WirelessHD transmitter. You see this screen:...

  • Page 89: Using The Wirelesshd Picture In Picture Feature

    3. Press the Input button repeatedly to highlight different input sources. 4. When you have highlighted the source you want to switch to, release the Input button. After a few seconds, the display switches to the highlighted source. Parent topic: Using WirelessHD Using the WirelessHD Picture in Picture Feature If you have connected multiple video sources to the WirelessHD transmitter, you can use the...

  • Page 90: Adjusting The Menu Settings

    Adjusting the Menu Settings Follow the instructions in these sections to access the projector menu system and change projector settings. Using the Projector's Menus Image Quality Settings - Image Menu Input Signal Settings - Signal Menu Projector Feature Settings - Settings Menu Projector Memory Options - Memory Menu Projector Network Settings - Network Menu Projector Information Display - Info Menu...
  • Page 91 You see the menu screen displaying the Image menu settings. 2. Press the up or down arrow button to move through the menus listed on the left. The settings for each menu are displayed on the right. Note: The available settings depend on the current input source. 3.

  • Page 92: Image Quality Settings - Image Menu

    Image Quality Settings - Image Menu Settings on the Image menu let you adjust the quality of your image for the input source you are currently using. The available settings depend on the currently selected input source. To change settings for an input source, make sure the source is connected and select that source. Setting Options Description...
  • Page 93 Epson Super White* RGB: adjusts the offset and gain for each color RGBCMY: adjusts the hue, saturation, and brightness for each color Epson Super White: reduces over-exposure of whites in your image Power Consumption High Adjusts the brightness level, power usage, and fan noise;...

  • Page 94: Input Signal Settings - Signal Menu

    Related concepts Color Mode Input Signal Settings - Signal Menu Normally the projector detects and optimizes the input signal settings automatically. If you need to customize the settings, you can use the Signal menu. The available settings depend on the currently selected input source.
  • Page 95 Setting Options Description 3D Setup 3D Display Selects various 3D options 2D-to-3D Conversion 3D Display: enables 3D mode (PowerLite Home Cinema 2D-to-3D Conversion: converts 3500/3510/3600e) 2D images to 3D 3D Format 3D Format: selects the 3D format 3D Depth 3D Depth: sets the depth for the Diagonal Screen Size 3D image 3D Brightness...
  • Page 96 Setting Options Description Deinterlacing* Sets whether to convert interlaced to progressive signals Video for certain video image types Film/Auto Off: for fast-moving video images Video: for most video images Film/Auto: for movies, computer graphics, and animation Motion Detection 1 to 5 Selects how the image is converted to a progressive signal (Adjust this setting if you...
  • Page 97 Setting Options Description Advanced Noise Reduction Noise Reduction: reduces flickering in analog images in Setup Level three levels Overscan Setup Level: adjusts the level at HDMI Video Range which dark areas of the image are rendered black; leave this Image Processing setting at 0% for most video equipment;...

  • Page 98: Projector Feature Settings - Settings Menu

    Related tasks Viewing 3D Images Projector Feature Settings - Settings Menu Options on the Settings menu let you customize various projector features. Setting Options Description H/V-Keystone V-Keystone Adjusts the angle of the horizontal and vertical sides in the projected image H-Keystone Audio Volume...
  • Page 99 Setting Options Description HDMI Link Device Connections Adjusts the HDMI Link options so you can use the projector remote to control HDMI Link HDMI-connected devices that support Audio Out Device the CEC standard Power On Link Device Connections: lists the devices connected to the HDMI 1 and HDMI 2 Power Off Link ports, or to the WirelessHD transmitter...
  • Page 100 Setting Options Description WirelessHD Device Connections Adjusts settings for use with the WirelessHD transmitter (PowerLite Home Cinema WirelessHD 3600e) Device Connections: displays a list of Reception available WirelessHD devices WiHD Mode WirelessHD: controls whether the Reset projector receives WirelessHD signals Reception: displays the strength of the WirelessHD signal WiHD Mode: adjusts the WirelessHD...
  • Page 101 Setting Options Description Picture in Picture See the list of available Adjusts the size and location of the sub- Picture in Picture options screen, swaps sources, and exits Picture in Picture mode Operation Direct Power On Selects various operation options Sleep Mode Direct Power On: turns on the projector when you plug it in...
  • Page 102 Setting Options Description Panel Alignment Panel Alignment Corrects color misalignment in the projected image Select Color Panel Alignment: enables adjustments Pattern Color for color convergence (the alignment of Start Adjustments the red and blue colors in the projected image) Reset Select Color: specifies the color convergence to correct Pattern Color: specifies the color pattern...

  • Page 103: Projector Memory Options - Memory Menu

    Projector Memory Options - Memory Menu Your projector comes with 10 memory locations where you can save customized settings to obtain the best picture quality for each of your video inputs. Setting Description Load Memory Displays the list of customized settings entries that you have created;...

  • Page 104: Projector Network Settings - Network Menu

    Projector Network Settings - Network Menu Settings on the Network menu let you view network information and set up the projector for control over a network. Setting Options Description Net. Info - Wireless LAN Connection mode Displays wireless network status and details Wireless LAN system Antenna level...

  • Page 105: Projector Information Display - Info Menu

    Parent topic: Adjusting the Menu Settings Projector Information Display - Info Menu You can display information about the projector and input sources by viewing the Info menu. However, you cannot change any settings in the menu. The information displayed depends on the currently selected input source.
  • Page 106 Displays the number of hours (H) the lamp has been used in each Power Consumption mode; if the information is displayed in yellow, obtain a genuine Epson replacement lamp soon Source Displays the name of the port to which the current input source is connected...

  • Page 107: Event Id Code List

    Setting Options Description Version Main Displays the firmware version of the projector Video Video2 Event ID Code List Parent topic: Adjusting the Menu Settings Related references Optional Equipment and Replacement Parts Related tasks Replacing the Lamp Resetting the Lamp Timer Event ID Code List If the Event ID option on the Info menu displays a code number, check this list of Event ID codes for the solution to the projector problem associated with the code.

  • Page 108: Projector Reset Options - Reset Menu

    0899 A communication error has occurred. Try restarting the EasyMP Network Projection program and restarting your projector. If that does not solve the problem, contact Epson for help. Parent topic: Projector Information Display - Info Menu Projector Reset Options - Reset Menu You can reset most of the projector settings to their default values using the Reset All option on the Reset menu.
  • Page 109 You cannot reset the following settings using the Reset All option: • Language • Lamp Hours • Memory settings • All settings in the Network menu • Panel Alignment Parent topic: Adjusting the Menu Settings...

  • Page 110: Maintaining And Transporting The Projector

    The only parts you should replace are the lamp, air filter, and remote control batteries. If any other part needs replacing, contact Epson or an authorized Epson servicer. Warning: Before cleaning any part of the projector, turn it off and unplug the power cord. Never open any cover on the projector, except as specifically explained in this manual.

  • Page 111: Cleaning The 3D Glasses

    • To remove stubborn smudges, moisten a soft, lint-free cloth with lens cleaner and gently wipe the lens. Do not spray any liquid directly on the lens. Warning: Do not use a lens cleaner that contains flammable gas. The high heat generated by the projector lamp may cause a fire.

  • Page 112: Air Filter And Vent Maintenance

    Filter maintenance intervals will depend on the environment. If regular maintenance is not performed, your Epson projector will notify you when the temperature inside the projector has reached a high level. Do not wait until this warning appears to maintain your projector filter as prolonged exposure to high temperatures may reduce the life of your projector or lamp.
  • Page 113 2. Lift the tab on the bottom of the air filter cover and pull down to remove the cover. 3. Pull the air filter out of the projector.
  • Page 114 4. Tap each side of the air filter 4 to 5 times to shake off any excess dust. Caution: Do not use excessive force when tapping the air filter, or it may crack and become unusable. Do not rinse the air filter in water, or use any detergent or solvent to clean it. Do not use canned air;...

  • Page 115: Replacing The Air Filter

    6. Place the air filter back in the projector as shown. 7. Attach the air filter cover as shown, and press it gently until it clicks into place. Parent topic: Air Filter and Vent Maintenance Related tasks Replacing the Air Filter Replacing the Air Filter You need to replace the air filter in the following situations: •...
  • Page 116 You can replace the air filter while the projector is mounted to the ceiling or placed on a table. 1. Turn off the projector and unplug the power cord. 2. Lift the tab on the bottom of the air filter cover and pull down to remove the cover. 3.
  • Page 117 4. Place the new air filter in the projector as shown. 5. Close the air filter cover.

  • Page 118: Projector Lamp Maintenance

    6. Attach the air filter cover as shown, and press it gently until it clicks into place. Parent topic: Air Filter and Vent Maintenance Projector Lamp Maintenance The projector keeps track of the number of hours the lamp is used and displays this information in the projector's menu system.
  • Page 119 Warning: Let the lamp fully cool before replacing it to avoid injury. You can replace the lamp while the projector is mounted to the ceiling, if necessary. 1. Turn off the projector and unplug the power cord. 2. Allow the projector lamp to cool down for at least one hour. 3.
  • Page 120 4. Slide the lamp cover out and lift it off. 5. Loosen the screws securing the lamp to the projector. The screws do not come all the way out.
  • Page 121 6. Lift up the lamp handle and gently pull the lamp out of the projector. Note: The lamp(s) in this product contain mercury. Please consult your state and local regulations regarding disposal or recycling. Do not put in the trash.
  • Page 122 7. Gently insert the new lamp into the projector. If it does not fit easily, make sure it is facing the right way. Caution: Do not touch any glass on the lamp assembly to avoid premature lamp failure. 8. Push in the lamp firmly and tighten the screws to secure it.

  • Page 123: Resetting The Lamp Timer

    Caution: Do not over-tighten the screws. 9. Replace the lamp cover and tighten the screw to secure it. Note: Be sure the lamp cover is securely installed or the lamp will not come on. Reset the lamp timer to zero to keep track of the new lamp’s usage. Parent topic: Projector Lamp Maintenance Related tasks...

  • Page 124: Replacing The Remote Control Batteries

    3. Select the Reset menu and press Enter. 4. Select Reset Lamp Hours and press Enter. You see a prompt asking if you want to reset the lamp hours. 5. Select Yes and press Enter. 6. Press Menu or Esc to exit the menus. Parent topic: Projector Lamp Maintenance Replacing the Remote Control Batteries...
  • Page 125 1. Open the battery cover as shown. 2. Remove the old batteries. Warning: If the battery fluid has leaked, wipe it away with a soft cloth and avoid getting the fluid on your hands. If it gets on your hands, wash them immediately to avoid injury. 3.

  • Page 126: Transporting The Projector

    4. Close the battery cover and press it down until it clicks into place. Warning: Dispose of used batteries according to local regulations. Do not expose batteries to heat or flame. Keep batteries out of the reach of children; they are choking hazards and are very dangerous if swallowed.
  • Page 127 Note: Epson shall not be liable for any damages incurred during transportation. Parent topic: Maintaining and Transporting the Projector...

  • Page 128: Solving Problems

    • The lights on the projector may indicate what the problem is. • The solutions in this manual can help you solve many problems. If none of these solutions help, you can contact Epson for technical support. Parent topic: Solving Problems...

  • Page 129: Projector Light Status

    Projector Light Status The lights on the projector indicate the projector status and let you know when a problem occurs. Check the status and color of the lights and look for a solution in the table here. Power light Status light Lamp light Temp (temperature) light Power light...
  • Page 130 • Clean or replace the air filter • If operating the projector at high altitude, turn on High Altitude Mode • If the problem persists, unplug the projector and contact Epson for help Flashing blue Orange Lamp has a problem •...

  • Page 131: Solving Image Or Sound Problems

    Epson for help Flashing blue Flashing Flashing Auto Iris error; turn the projector off, orange orange unplug it, and contact Epson for help Flashing blue Orange Orange Power error; turn the projector off, unplug it, and contact Epson for help Flashing blue Flashing Internal projector error;...

  • Page 132: Solutions When No Image Appears

    Solutions When the Image Contains Noise or Static Solutions When the Image is Fuzzy or Blurry Solutions When the Image Brightness or Colors are Incorrect Solutions When a 3D Image Does Not Display Correctly Solutions When a WirelessHD Source Does Not Display Correctly Solutions to Sound Problems Parent topic: Solving Problems...

  • Page 133: Solutions When "No Signal" Message Appears

    Solutions When "No Signal" Message Appears If the "No Signal" message appears, try the following solutions: • Press the Source button on the projector repeatedly to cycle through the available sources. Wait a few seconds for an image to appear. •...

  • Page 134: Solutions When "Not Supported" Message Appears

    2. Click the Arrangement tab. 3. Select the Mirror Displays checkbox. Parent topic: Solutions When "No Signal" Message Appears Solutions When "Not Supported" Message Appears If the "Not Supported" message appears, try the following solutions: • Make sure the computer's display resolution does not exceed the projector's resolution and frequency limit.

  • Page 135: Solutions When The Image Contains Noise Or Static

    Related concepts Image Shape Related tasks Adjusting the Image Position Using Lens Shift Solutions When the Image Contains Noise or Static If the projected image seems to contain electronic interference (noise) or static, try the following solutions: • Check the cables connecting your computer or video source to the projector. They should be: •...

  • Page 136: Solutions When The Image Brightness Or Colors Are Incorrect

    Note: To avoid condensation on the lens after bringing the projector in from a cold environment, let the projector warm up to room temperature before using it. • Position the projector close enough to the screen. • Adjust the Sharpness setting to improve image quality. •...

  • Page 137: Solutions When A 3D Image Does Not Display Correctly

    Auto, but in some cases you may need to select a different setting to match the 3D signal from your video device. • Make sure you are using RF 3D active shutter glasses. You can purchase them from Epson. • Make sure your 3D glasses are turned on and fully charged. If the glasses have entered standby mode, slide the power switch on the glasses to the Off position and then back to the On position.

  • Page 138: Solutions When A Wirelesshd Source Does Not Display Correctly

    Related tasks Pairing the 3D Glasses with the Projector Charging the 3D Glasses Solutions When a WirelessHD Source Does Not Display Correctly If a WirelessHD source does not display correctly, try the following solutions: • Make sure WirelessHD is selected as the image source on the projector. •...

  • Page 139: Solving Projector Or Remote Control Operation Problems

    • Press the A/V Mute button on the remote control to resume video and audio if they were temporarily stopped. • Press the Source button on the projector or a source button on the remote control to switch to the correct input source, if necessary.

  • Page 140: Solutions To Problems With The Remote Control

    • If you assigned an ID number to the remote control to operate multiple projectors, you may need to check or change the ID setting (feature not available with all projectors). • If you lose the remote control, you can order another one from Epson. Parent topic:...

  • Page 141: Where To Get Help

    Epson with your questions. Speak to a Support Representative To use the Epson PrivateLine Support service, call (800) 637-7661. This service is available for the duration of your warranty period. You may also speak with a projector support specialist by dialing (562) 276-4394 (U.S.) or (905) 709-3839 (Canada).
  • Page 142 Purchase Supplies and Accessories You can purchase screens, other optional accessories, and replacement parts from an Epson authorized reseller. To find the nearest reseller, call 800-GO-EPSON (800-463-7766). Or you can purchase online epsonstore.com (U.S. sales) or epson.ca (Canadian sales). To purchase a replacement remote control, call (562) 276-4394 (U.S.) or (905) 709-3839 (for dealer referral in Canada).

  • Page 143: Technical Specifications

    Focal length: 18.2 to 29.2 mm Color reproduction Full color, up to 1 billion colors Brightness PowerLite Home Cinema 3000: High Power Consumption mode: White light output 2300 lumens (ISO 21118 standard) Color light output 2300 lumens Medium Power Consumption mode:...
  • Page 144 IDMS 15.4; white light output measured in accordance with ISO 21118. Contrast ratio PowerLite Home Cinema 3000: 60000:1 with Auto Iris on, High Power Consumption mode, Dynamic Color Mode, and Wide Zoom PowerLite Home Cinema 3500/3510/3600e:...

  • Page 145: Projector Lamp Specifications

    Internal sound system Two 10 W speakers (PowerLite Home Cinema 3500/3510/3600e) Noise level 35 dB (High Power Consumption mode) 32 dB (Medium Power Consumption mode) 24 dB (ECO Power Consumption mode) Keystone correction angle ± 30° vertical and horizontal USB Type A port compatibility One USB 1.1 and 2.0 compliant port for USB device input, wireless LAN, and firmware updating Parent topic: Technical Specifications...

  • Page 146: Projector Dimension Specifications

    6.2 inches (157 mm) Width 16.1 inches (410 mm) Depth 12.0 inches (304 mm) Weight PowerLite Home Cinema 3000: 14.1 lb (6.4 kg) PowerLite Home Cinema 3500/3510: 14.8 lb (6.7 kg) PowerLite Home Cinema 3600e: 15.0 lb (6.8 kg) Parent topic:...

  • Page 147: Projector Environmental Specifications

    Power consumption Operating: (100 to 120 V) PowerLite Home Cinema 3000: Medium Power Consumption mode: 361 W ECO Power Consumption mode: 272 W PowerLite Home Cinema 3500/3510/3600e: Medium Power Consumption mode: 385 W ECO Power Consumption mode: 296 W Standby: 0.29 W (Communication Off), 1.6 W (Communication On)

  • Page 148: Projector Safety And Approvals Specifications

    For best results, your computer's monitor port or video card resolution should be set to display in the projector's native resolution. However, your projector includes Epson's SizeWise chip that supports other computer display resolutions, so your image will be resized to fit automatically.
  • Page 149 Display format Refresh rate (in Hz) Resolution (in pixels) WXGA 1280 × 768 1366 × 768 1280 × 800 WXGA++ 1600 × 900 Composite video TV (NTSC) 720 × 480 TV (SECAM) 720 × 576 TV (PAL) 50/60 720 × 576 Component video SDTV (480i) 720 ×...
  • Page 150 Display format Refresh rate (in Hz) Resolution (in pixels) SDTV (576i/576p) 720 × 576 HDTV (720p) 50/60 1280 × 720 HDTV (1080i) 50/60 1920 × 1080 HDTV (1080p) 24/30 1920 × 1080 Wireless HD input signals 640 × 480 SDTV (480i/480p) 720 ×...
  • Page 151 Display format Refresh rate (in Hz) Resolution (in pixels) 3D formats HDTV 50/60 1280 × 720 Side by Side (720p) Top and Bottom HDTV (1080i) 50/60 1920 × 1080 Side by Side HDTV (1080p) 50/60 1920 × 1080 — 1920 × 1080 Side by Side Top and Bottom * HDMI5 port only...

  • Page 152: Notices

    FCC Compliance Statement Trademarks Open Source Software License Copyright Notice Recycling Epson offers a recycling program for end of life products. Please go to this site for information on how to return your products for proper disposal. Parent topic: Notices Important Safety Information Caution: Never look into the projector lens when the lamp is turned on;...

  • Page 153: Important Safety Instructions

    Important Safety Instructions Follow these safety instructions when setting up and using the projector: • Do not look into the lens when the projector is on. The bright light can damage your eyes. Avoid standing in front of the projector so the bright light does not shine into your eyes. •...
  • Page 154 • Never allow objects of any kind to enter any openings in the projector. Do not leave objects, especially flammable objects, near the projector. Never spill liquid of any kind into the projector. • If you are using two or more projectors side-by-side, leave at least 2 feet (60 cm) of space between the projectors to allow for proper ventilation.
  • Page 155 • Do not store the projector outside of the required temperature range of 14 to 140 °F (–10 to 60 °C) or in direct sunlight for long periods of time. Doing so may cause damage to the case. • Do not place anything that can become warped or damaged by heat near the exhaust vents. Do not bring your hands or face close to the vents while projection is in progress.

  • Page 156: 3D Safety Instructions

    3D Safety Instructions Follow these 3D safety instructions when setting up and using the projector: • If you or any viewer experiences the following symptoms or other major discomfort from viewing 3D video images, immediately stop viewing and contact your health care provider: convulsions, eye or muscle twitching, loss of awareness, altered vision, involuntary movements, disorientation, eye strain, nausea/vomiting, dizziness, headaches, fatigue, or blurry/double vision that lasts longer than few seconds.

  • Page 157: Restriction Of Use

    • When charging the 3D glasses, only use the supplied charging cable and connect the cable to the USB port designated by Epson. Do not charge the 3D glasses using other devices as it may cause the battery to leak, overheat, ignite, or explode.

  • Page 158: Fcc Compliance Statement

    For Canadian Users CAN ICES-3(B)/NMB-3(B) Parent topic: Notices Trademarks ® ® ® EPSON , EasyMP , and PowerLite are registered trademarks, and EPSON Exceed Your Vision is a registered logomark of Seiko Epson Corporation.

  • Page 159: Open Source Software License

    We provide the source code of the GPL Programs until five (5) years after the discontinuation of same model of this projector product. If you desire to receive the source code of the GPL Programs, contact Epson as described in the User's Guide.
  • Page 160 0.9.8 uvc rev.219 wireless_tools 29 EPSON original drivers Stonestreet One Drivers The GNU General Public License Version 2 is as follows. You also can see the GNU General Public License Version 2 at http://www.gnu.org/licenses/. GNU GENERAL PUBLIC LICENSE Version 2, June 1991 Copyright (c) 1989, 1991 Free Software Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA...
  • Page 161 Also, for each author's protection and ours, we want to make certain that everyone understands that there is no warranty for this free software. If the software is modified by someone else and passed on, we want its recipients to know that what they have is not the original, so that any problems introduced by others will not reflect on the original authors' reputations.
  • Page 162 c) If the modified program normally reads commands interactively when run, you must cause it, when started running for such interactive use in the most ordinary way, to print or display an announcement including an appropriate copyright notice and a notice that there is no warranty (or else, saying that you provide a warranty) and that users may redistribute the program under these conditions, and telling the user how to view a copy of this License.
  • Page 163 so on) of the operating system on which the executable runs, unless that component itself accompanies the executable. If distribution of executable or object code is made by offering access to copy from a designated place, then offering equivalent access to copy the source code from the same place counts as distribution of the source code, even though third parties are not compelled to copy the source along with the object code.
  • Page 164 This section is intended to make thoroughly clear what is believed to be a consequence of the rest of this License. 8. If the distribution and/or use of the Program is restricted in certain countries either by patents or by copyrighted interfaces, the original copyright holder who places the Program under this License may add an explicit geographical distribution limitation excluding those countries, so that distribution is permitted only in or among countries not thus excluded.
  • Page 165 END OF TERMS AND CONDITIONS How to Apply These Terms to Your New Programs If you develop a new program, and you want it to be of the greatest possible use to the public, the best way to achieve this is to make it free software which everyone can redistribute and change under these terms.
  • Page 166 We provide the source code of the LGPL Programs until five (5) years after the discontinuation of same model of this projector product. If you desire to receive the source code of the LGPL Programs, please see the "EPSON Projector Contact List" in the User's Guide, and contact the customer support of your region.
  • Page 167 This license, the Lesser General Public License, applies to some specially designated software packages--typically libraries--of the Free Software Foundation and other authors who decide to use it. You can use it too, but we suggest you first think carefully about whether this license or the ordinary General Public License is the better strategy to use in any particular case, based on the explanations below.
  • Page 168 We call this license the "Lesser" General Public License because it does Less to protect the user's freedom than the ordinary General Public License. It also provides other free software developers Less of an advantage over competing non-free programs. These disadvantages are the reason we use the ordinary General Public License for many libraries.
  • Page 169 Activities other than copying, distribution and modification are not covered by this License; they are outside its scope. The act of running a program using the Library is not restricted, and output from such a program is covered only if its contents constitute a work based on the Library (independent of the use of the Library in a tool for writing it).
  • Page 170 In addition, mere aggregation of another work not based on the Library with the Library (or with a work based on the Library) on a volume of a storage or distribution medium does not bring the other work under the scope of this License. 3.
  • Page 171 Otherwise, if the work is a derivative of the Library, you may distribute the object code for the work under the terms of Section 6. Any executables containing that work also fall under Section 6, whether or not they are linked directly with the Library itself. 6.
  • Page 172 It may happen that this requirement contradicts the license restrictions of other proprietary libraries that do not normally accompany the operating system. Such a contradiction means you cannot use both them and the Library together in an executable that you distribute. 7.
  • Page 173 It is not the purpose of this section to induce you to infringe any patents or other property right claims or to contest validity of any such claims; this section has the sole purpose of protecting the integrity of the free software distribution system which is implemented by public license practices.
  • Page 174 THE LIBRARY AS PERMITTED ABOVE, BE LIABLE TO YOU FOR DAMAGES, INCLUDING ANY GENERAL, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES ARISING OUT OF THE USE OR INABILITY TO USE THE LIBRARY (INCLUDING BUT NOT LIMITED TO LOSS OF DATA OR DATA BEING RENDERED INACCURATE OR LOSSES SUSTAINED BY YOU OR THIRD PARTIES OR A FAILURE OF THE LIBRARY TO OPERATE WITH ANY OTHER SOFTWARE), EVEN IF SUCH HOLDER OR OTHER PARTY HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES.
  • Page 175 BSD License (Berkeley Software Distribution License) This projector product includes the open source software program "University of California, Berkeley License (Berkeley Software Distribution License)" which applies the terms and conditions provided by owner of the copyright to the "BSD License". The "BSD License"...
  • Page 176 The "libjpeg" are WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. List of libjpeg programs libjpeg-6b License terms of conditions of each program which are provided by owner of the copyright to the "libjpeg"...
  • Page 177 (3) Permission for use of this software is granted only if the user accepts full responsibility for any undesirable consequences; the authors accept NO LIABILITY for damages of any kind. These conditions apply to any software derived from or based on the IJG code, not just to the unmodified library.
  • Page 178 The "libpng" are WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. List of libpng programs libpng-1.2.49 License terms of conditions of each program which are provided by owner of the copyright to the "libpng" are as follows.
  • Page 179 libpng versions 0.89, June 1996, through 0.96, May 1997, are Copyright (c) 1996, 1997 Andreas Dilger Distributed according to the same disclaimer and license as libpng-0.88, with the following individuals added to the list of Contributing Authors: John Bowler Kevin Bracey Sam Bushell Magnus Holmgren Greg Roelofs...
  • Page 180 A "png_get_copyright" function is available, for convenient use in "about" boxes and the like: printf("%s",png_get_copyright(NULL)); Also, the PNG logo (in PNG format, of course) is supplied in the files "pngbar.png" and "pngbar.jpg" (88x31) and "pngnow.png" (98x31). Libpng is OSI Certified Open Source Software. OSI Certified Open Source is a certification mark of the Open Source Initiative.
  • Page 181 jloup@gzip.org Mark Adler madler@alumni.caltech.edu If you use the zlib library in a product, we would appreciate *not* receiving lengthy legal documents to sign. The sources are provided for free but without warranty of any kind. The library has been entirely written by Jean-loup Gailly and Mark Adler;...
  • Page 182 "Object" form shall mean any form resulting from mechanical transformation or translation of a Source form, including but not limited to compiled object code, generated documentation, and conversions to other media types. "Work" shall mean the work of authorship, whether in Source or Object form, made available under the License, as indicated by a copyright notice that is included in or attached to the work (an example is provided in the Appendix below).
  • Page 183 4. Redistribution. You may reproduce and distribute copies of the Work or Derivative Works thereof in any medium, with or without modifications, and in Source or Object form, provided that You meet the following conditions: (a) You must give any other recipients of the Work or Derivative Works a copy of this License; and (b) You must cause any modified files to carry prominent notices stating that You changed the files;...
  • Page 184 8. Limitation of Liability. In no event and under no legal theory, whether in tort (including negligence), contract, or otherwise, unless required by applicable law (such as deliberate and grossly negligent acts) or agreed to in writing, shall any Contributor be liable to You for damages, including any direct, indirect, special, incidental, or consequential damages of any character arising as a result of this License or out of the use or inability to use the Work (including but not limited to damages for loss of goodwill, work stoppage, computer failure or malfunction, or any and all other commercial damages or losses), even if...
  • Page 185 The "aes-src-29-04-09" are WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. List of es-src-29-04-09 programs aes-src-29-04-09 License terms of conditions of each program which are provided by owner of the copyright to the "aes- src-29-04-09"...
  • Page 186 (1) Red Hat Incorporated Copyright (c) 1994-2007 Red Hat, Inc. All rights reserved. This copyrighted material is made available to anyone wishing to use, modify, copy, or redistribute it subject to the terms and conditions of the BSD License. This program is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY expressed or implied, including the implied warranties of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
  • Page 187 Permission to use, copy, modify, and distribute this software for any purpose without fee is hereby granted, provided that this entire notice is included in all copies of any software which is or includes a copy or modification of this software and in all copies of the supporting documentation for such software. THIS SOFTWARE IS BEING PROVIDED "AS IS", WITHOUT ANY EXPRESS OR IMPLIED WARRANTY.
  • Page 188 29K Support Products Mail Stop 573 5900 E. Ben White Blvd. Austin, TX 78741 800-292-9263 (5) C.W. Sandmann Copyright (C) 1993 C.W. Sandmann This file may be freely distributed as long as the author's name remains. (6) Eric Backus (C) Copyright 1992 Eric Backus This software may be used freely so long as this copyright notice is left intact.
  • Page 189 (11) Christopher G. Demetriou Copyright (c) 2001 Christopher G. Demetriou All rights reserved. Redistribution and use in source and binary forms, with or without modification, are permitted provided that the following conditions are met: 1. Redistributions of source code must retain the above copyright notice, this list of conditions and the following disclaimer.
  • Page 190 San Jose CA 95134 (13) Royal Institute of Technology Copyright (c) 1999 Kungliga Tekniska Hökolan (Royal Institute of Technology, Stockholm, Sweden). All rights reserved. Redistribution and use in source and binary forms, with or without modification, are permitted provided that the following conditions are met: 1.
  • Page 191 THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;...
  • Page 192 1. Redistributions of source code must retain the above copyright notice, this list of conditions and the following disclaimer. 2. Redistributions in binary form must reproduce the above copyright notice, this list of conditions and the following disclaimer in the documentation and/or other materials provided with the distribution. THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS "AS IS"...
  • Page 193 THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;...
  • Page 194 Redistribution and use in source and binary forms is permitted provided that the above copyright notice and following paragraph are duplicated in all such forms. This file is distributed WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. (23) Intel (i960) Copyright (c) 1993 Intel Corporation Intel hereby grants you permission to copy, modify, and distribute this software and its documentation.
  • Page 195 DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
  • Page 196 2. Redistributions in binary form must reproduce the above copyright notice, this list of conditions and the following disclaimer in the documentation and/or other materials provided with the distribution. THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
  • Page 197 Redistribution and use in source and binary forms, with or without modification, are permitted provided that the following conditions are met: 1. Redistributions of source code must retain the above copyright notice, this list of conditions and the following disclaimer. 2.
  • Page 198 Copyright (c) 2001 Daniel Eischen <deischen@FreeBSD.org>. All rights reserved. Redistribution and use in source and binary forms, with or without modification, are permitted provided that the following conditions are met: 1. Redistributions of source code must retain the above copyright notice, this list of conditions and the following disclaimer.
  • Page 199 OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. (36) - CodeSourcery, Inc.
  • Page 200 * * Redistributions of source code must retain the above copyright notice, this list of conditions and the following disclaimer. * * Redistributions in binary form must reproduce the above copyright notice, this list of conditions and the following disclaimer in the documentation and/or other materials provided with the distribution. * * Neither the name of MIPS Technologies Inc.
  • Page 201 of the Software, and to permit persons to whom the Software is furnished to do so, subject to the following conditions: The above copyright notice and this permission notice shall be included in all copies or substantial portions of the Software. THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT.
  • Page 202 (2) When this software is redistributed in a form in which it can be used in the development of other software, library form, etc., the above copyright display, these terms of utilization, and the following stipulation of no guarantee shall be inserted in documentation accompanying redistribution (user's manual, etc.).
  • Page 203 1. Redistributions of source code must retain the above copyright notice, this list of conditions and the following disclaimer. 2. Redistributions in binary form must reproduce the above copyright notice, this list of conditions and the following disclaimer in the documentation and/or other materials provided with the distribution. 3.

  • Page 204: Copyright Notice

    Seiko Epson Corporation. The information contained herein is designed only for use with this Epson product. Epson is not responsible for any use of this information as applied to other products.

  • Page 205: A Note Concerning Responsible Use Of Copyrighted Materials

    Seiko Epson Corporation shall not be liable for any damages or problems arising from the use of any options or any consumable products other than those designated as Original Epson Products or Epson Approved Products by Seiko Epson Corporation. This information is subject to change without notice.

This manual is also suitable for:

Powerlite home cinema 3500Powerlite home cinema 3510Powerlite home cinema 3600ePowerlite home 3000

Table of Contents