To Operate Chronograph Mode Manually; To Operate Chronograph Mode Hands-Free; To View Performance Data In Chronograph Mode - Timex W-184 User Manual

NOTE: Press MODE to switch the Watch display to any other
mode while the chronograph continues to run. The
stopwatch icon will appear to indicate the chronograph
is still functioning.

TO OPERATE CHRONOGRAPH MODE MANUALLY

1. Press MODE until Chronograph Mode appears.
2. Press START/SPLIT to begin timing.
3. Press START/SPLIT again to take a split and automatically
begin timing a new lap.
The Watch stores lap and split information and displays
average statistics for the lap if you are using the Fitness
Sensors.
4. Press MODE to immediately display new lap information
OR
Wait for a few seconds and the Watch will automatically begin
to display data for a new lap.
5. Press STOP/RESET to stop timing when you reach the end
of your activity.
6. Press START/SPLIT to continue timing.
OR
Press and hold STOP/RESET to reset the chronograph
display to zero.
28

TO OPERATE CHRONOGRAPH MODE HANDS-FREE

You can set Chronograph Mode to start when you begin moving
and to stop when you stop moving or to automatically take splits
based on either distance or elapsed time. See "Hands-free
settings" on page 66.

TO VIEW PERFORMANCE DATA IN CHRONOGRAPH MODE

When using Fitness Sensors with your Watch, scroll through
performance data by pressing and releasing DISPLAY.
Performance data viewing options for Chronograph Mode include:
Heart Rate: Current heart rate (requires HR Sensor).
Speed: Current velocity (requires GPS-3D Sensor).
Average Speed: Average velocity for the period that
chronograph has been running (requires GPS-3D Sensor).
Pace: Current velocity, expressed in minutes per selected
distance unit, such as miles or kilometers (requires GPS-3D
Sensor).
Average Pace: Average per-minute speed for the period that
chronograph has been running (requires GPS-3D Sensor).
Distance: Distance traveled since the chronograph was started
(requires GPS-3D Sensor).
Altitude: Current height above sea level (requires GPS-3D
Sensor).
29