Watch Button Functions; Watch Case Buttons; Setting Buttons; To Set Watch Functions - Timex W-184 User Manual

Watch button functions

The buttons on your Watch are multi-functional, serving three
purposes. You do not have to memorize button functions for each
mode. Let the Watch serve as your guide.

Watch case buttons

Most of the time, the Watch buttons function according to the
labels printed on the case. If you do not see any of symbols on the
display, follow the information printed on the Watch case to guide
you in using the buttons.
INDIGLO ®
night-light
Press to light
the watch
MODE
Press to go to
the next mode
START/SPLIT
Press to start timing or
take a split
12
DISPLAY
Press to display
performance data
SET/FORMAT
Press to set or change
the display format
STOP/RESET
Press to stop or press
and hold to reset

Setting buttons

Watch buttons also set Watch functions (for example, setting the
time or a target heart rate zone). When the
appear on the Watch display, you have initiated the setting process.
INDIGLO®
night-light
Press to light
the watch
DONE
Press when finished
setting

TO SET WATCH FUNCTIONS

Use the following steps to set Watch functions:
1. Press and hold SELECT (SET/FORMAT). The message
HOLD TO SET may appear.
2. Continue pressing SELECT (SET/FORMAT) until SET
briefly appears on the display, followed by a flashing value.
3. Set the first value by pressing
(STOP/RESET).
+ -
and symbols
+
Press to increase the
displayed value
SELECT
Press to begin setting or
move to the next value
-
Press to decrease the
displayed value
+ -
(DISPLAY) or
13