To Switch Time Zones; To Synchronize Time Of Day With Fitness Sensors; To View Performance Data In Time Of Day Mode - Timex W-184 User Manual

TO SWITCH TIME ZONES

The Watch can track two time zones (T1 and T2). Look at the
other zone by pressing START/SPLIT. Or, switch from T1 to T2
using these steps:
1. Press and hold START/SPLIT until HOLD FOR TIME 2
displays.
2. Continue to hold until the time switches and the Watch beeps.
3. Repeat steps 1 and 2 to switch back to T1. The message will
read HOLD FOR TIME 1.
You must independently set the time of day for each time zone.

TO SYNCHRONIZE TIME OF DAY WITH FITNESS SENSORS

When you first activate the GPS-3D Sensor in conjunction with
your Watch, you can expect one of the following scenarios:
If you activate the GPS-3D Sensor before setting the time of
day, the Watch will synchronize both T1 and T2 with UTC. You
will need to adjust the hour for both time zones to your local
time.
If you activate the GPS-3D Sensor after setting the time of day,
the Watch maintains the hour and date settings and
synchronizes minutes and seconds to UTC for each time zone.
24
After initial use, the Watch will automatically correct any time
inaccuracy upon activation of the GPS-3D Sensor and every 15
minutes thereafter.

TO VIEW PERFORMANCE DATA IN TIME OF DAY MODE

When using Fitness Sensors with your Watch, scroll through
performance data by pressing and releasing DISPLAY.
Performance data viewing options for Time of Day Mode include:
Heart Rate: Current heart rate (requires HR Sensor).
Speed: Current velocity (requires GPS-3D Sensor).
Pace: Current velocity, expressed in minutes per selected
distance unit, such as miles or kilometers (requires GPS-3D
Sensor).
Distance: Distance traveled since the activation of the GPS-3D
Sensor (requires GPS-3D Sensor).
Press to view
performance data
Performance data
25