Chronograph Mode; Chronograph Mode Terminology; Chronograph Mode Functions; To Operate Chronograph Mode Manually - Timex Performance Watch User Manual

Chronograph Mode

INDIGLO®
night-light
To Vertical Mode
or hold for time
Start timing or
take a split

Chronograph Mode terminology

Chronograph: The chronograph records time segments for the
duration of your activity.
Lap: Lap time records the time for one segment of your activity.
Split: Split time records the total elapsed time since the beginning
of your current activity.
Taking a split: When you take a split, the chronograph will
complete timing one lap and begin timing a new one.

Chronograph Mode functions

Chronograph Mode operates as the main workout data center for
your Watch. It can record elapsed time for up to 100 hours. It can
also register information for up to 100 laps, including data for
speed, pace, and distance (using the GPS-3D Sensor); and average
heart rate (using the HR Sensor).
24
View performance
data
Swap upper and
middle lines
Stop or reset the
chronograph
NOTE: Press MODE to switch the Watch display to any other
mode while the chronograph continues to run. The
stopwatch icon will appear to indicate the chronograph
is still functioning.

TO OPERATE CHRONOGRAPH MODE MANUALLY

1. Press MODE until Chronograph Mode appears.
2. Press START/SPLIT to begin timing.
3. Press START/SPLIT again to take a split and automatically
begin timing a new lap.
The Watch stores lap and split information and displays
average statistics for the lap if you are using the Fitness
Sensors.
4. Press MODE to immediately display new lap information
OR
Wait for a few seconds and the Watch will automatically begin
to display data for a new lap.
5. Press STOP/RESET to stop timing when you reach the end
of your activity.
6. Press START/SPLIT to continue timing.
OR
Press and hold STOP/RESET to reset the chronograph
display to zero.
25