Timex W-292 - Watch Manual

Please read instructions carefully to understand how to operate your Timex ® watch. Your model may not have all of the features described in this booklet.

FEATURES AND BASIC OPERATION

• Time with 12- or 24-hour format
• Day and date
• 2nd time zone
• Optional hourly chime
• 24-hour stopwatch
• Daily alarm
• INDIGLO ® night-light

Press MODE repeatedly to step through modes: Time, Alarm (AL), Stopwatch (SP), and Time 2 (T2). Press MODE to exit current mode and return to Time mode.

TIME

To set time and date:

1. With time and date showing, press SET and hold for 2 seconds.
2. Seconds flash. Press START/STOP to set seconds to zero.
3. Press MODE. Hour flashes. Press START/STOP to change hour, including AM (no symbol) and PM.
4. Press MODE. Minutes flash. Press START/STOP to change minutes; hold button to scan values.
5. Press MODE. Year flashes. Press START/STOP to change year.
6. Press MODE. Month flashes. Press START/STOP to change month.
7. Press MODE. Date flashes. Press START/STOP to change date.
8. Press SET, at any step, to exit and save settings.

With time and date showing, press SET to switch between 12- or 24- hour time format.
Date (day of month) appears in upper part of display in Time mode. Press and hold START/STOP to see month, date, and year in large digits.

ALARM

Watch has a daily alarm. Press MODE repeatedly until AL appears.
To set alarm:

1. Press SET. Hour flashes. Press START/STOP to change hour, including AM (no symbol) and PM.
2. Press MODE. Minutes flash. Press START/STOP to change minutes; hold button to scan values.
3. Press SET, at any step, when done setting.

To turn on/off alarm and hourly chime, press START/STOP repeatedly. Watch will step through four combinations of alarm and chime settings. Alarm iconappears when alarm is on. CHIME iconappears when hourly chime is on – watch will chime on every hour.