Transceiver Length And Sub-Packing Mode; Operating Mode - Ebyte E32-DTU User Manual

Chengdu Ebyte Electronic Technology Co,;Ltd

5.7. Transceiver Length and Sub-packing Mode

Model
E64-DTU (433NW20)
★ Note:
1. If the data received by the station in a single time is larger than the capacity of a single packet, the excess data
will be automatically allocated to the second transmission until the completion of transmission.
2. The data transceiver cannot receive data which is more than the buffer capacity;

6. Operating mode

E64-DTU (433NW20) has four operating modes, if low power consumption is not required, normal communication is
recommended to configure the data transceiver for the normal mode (mode 0);
The factory default is normal mode (mode 0).
M ode 0 M aster M ode
M ode 1 Slave sending M ode
M ode 2 Slave receiving M ode
M ode 3
★ Note: no need to care about the wake-up mode (mode 1) and power saving mode (mode 2) if it doesn't reques t low
power consumption.
Chengdu Ebyte Electronic Technology Co,;Ltd
Copyright ©2012–2019，
Buffer
512Byte
Categories M1
ON
ON
OFF
Sleep M ode OFF
Automatically send 55 bytes per package
M0
Listen for all numbered slave data in the same channel. If the slave
ON
WOR is turned on, the slave can be awakened
OFF The module sends the data to the M aster
ON Open WOR to wait for host data
OFF Parameter setting using the configuration software
E32-DTU (433NW20) user manual
Sub-package
Description
11