Transceiver Length And Sub-Packing Mode; Operating Mode - Ebyte 230N33 User Manual

Chengdu Ebyte Electronic Technology Co,;Ltd

5.6. Transceiver Length and Sub-packing Mode

Model
E90-DTU (230N33)
★ Note:
1. If the data received by the station in a single time is larger than the capacity of a single packet, the excess data
will be automatically allocated to the second transmission until the completion of transmission.
2. The data transceiver cannot receive data which is more than the buffer capacity;

6. Operating Mode

E90-DTU (230N33) has four operating modes, if low power consumption is not required, normal communication is recommended to
configure the data transceiver for the normal mode (mode 0);
The factory default is normal mode (mode 0).
M ode 0
M ode 1
M ode 2
M ode 3
★ Note: no need to care about the wake-up mode (mode 1) and power saving mode (mode 2) if it doesn't request low
power consumption.
Chengdu Ebyte Electronic Technology Co,;Ltd
Copyright ©2012–2019，
Buffer
512 bytes
Categories M1
Normal M ode ON
Wake-up M ode ON
Power-saving M ode OFF
Sleep M ode OFF
Automatic subcontracting of 186 bytes to send
M0
ON Open UART and RF，transparent transmission is on
OFF Air wake-up mode, the packet comes with a wake-up code,
The air wake-up receive mode, saving receive power, the mode
ON
OFF Parameter setting using the configuration software
E 90-DTU (230N33) user manual
Sub-package
Description
cannot be transmitted
11