Voice Communication Samples - Planet VIP-156 Quick Start Manual

Voice Communication Samples

There are several ways to make calls to desired destination in
ATA. In this section, we'll guide you step by step to establishing
your first voice communication via keypad and web browsers
operations.
ATA to ATA Connection via IP Address
Assume there are two ATAs in the network; the IP addresses
are 192.168.0.1 and 192.168.0.2
Analog telephone sets are connected to the phone (RJ11) port
of ATAs, respectively
1 9
Operation Steps:
1. Pick up the telephone set on ATA A.
2. Press the keypad: 192*168*0*2# shall be able to connect to
the ATA B.
3. Then the phone in 192.168.0.2 should ring. Please repeat
the same dialing steps on ATA B to establish the first voice
communication from ATA A
1-10
192.168.0.1
2 1 6
*
192.168.0.2
8 0
* *
2 #