RAB Lighting GOOSE Installation Instructions

GOOSE & ARM24 INSTALLATION INSTRUCTIONS
Thank you for buying RAB lighting fixtures. Our goal is to design the best quality products to get the job done right. We'd like to hear your comments. Call
the Marketing Department at 888-RAB-1000, or email: marketing@rabweb.com
IMPORTANT
READ CAREFULLY BEFORE INSTALLING FIXTURE. RETAIN THESE INSTRUCTIONS FOR FUTURE REFERENCE
RAB fixtures must be wired in accordance with the National Electrical Code and all applicable local codes. Proper
grounding is required for safety. THIS PRODUCT MUST BE INSTALLED IN ACCORDANCE WITH THE APPLICABLE
INSTALLATION CODE BY A PERSON FAMILIAR WITH THE CONSTRUCTION AND OPERATION OF THE PRODUCT
AND THE HAZARDS INVOLVED.
Make certain power is OFF before installing or maintaining fixture. No user serviceable
WARNING:
parts inside.
GOOSE
CAUTION: Use mounting hardware appropriate for
the mounting surface and weight of the fixture.
1. Make supply connections in recessed junction box.
2. Mount Wall Plate to wall through (4) Mounting Holes
using appropriate hardware for your
mounting surface.
3. Mount fixture on other end of GOOSE. Works with
any 1/2" NPS threaded mounting.
4. Tighten Set Screws and all other screws
and hardware.
5. To ensure weatherproof seal, apply weatherproof
silicone sealant to all unused plugs and holes and all
along the edge of the Wall Plate. Use Teflon tape or
use weatherproof silicone sealant on Goose threads.
Set
Screws (2)
Wall Plate
GOOSE ARM24 IN 0612
Mounting
Holes (4)
GOOSE
ARM24
CAUTION: Use mounting hardware appropriate for
the mounting surface and weight of the fixture.
1. Make supply connections in recessed junction box.
2. Mount Wall Plate to wall through (4) Mounting Holes
using appropriate hardware for your
mounting surface.
3. Mount fixture on other end of ARM24. Works with
any 1/2" NPS threaded mounting.
4. Tighten Set Screws and all other screws
and hardware.
5. To ensure weatherproof seal, apply weatherproof
silicone sealant to all unused plugs and holes and all
along the edge of the Wall Plate. Use Teflon tape or
use weatherproof silicone sealant on Arm24 threads.
Set
Screws (2)
Wall Plate
Note: These instructions do not cover all details or variations
in equipment nor do they provide for every possible situation
during installation, operation or maintenance.
.
Mounting
Holes (4)
ARM24