Advertisement
ARMSV24 INSTALLATION INSTRUCTIONS
Thank you for buying RAB lighting fixtures. Our goal is to design the best quality products to get the job done right. We'd like to hear your comments. Call the
Marketing Department at 888-RAB-1000, or email: marketing@rabweb.com
IMPORTANT
READ CAREFULLY BEFORE INSTALLING FIXTURE. RETAIN THESE INSTRUCTIONS FOR FUTURE REFERENCE
RAB fixtures must be wired in accordance with the National Electrical Code and all applicable local codes. Proper
grounding is required for safety. THIS PRODUCT MUST BE INSTALLED IN ACCORDANCE WITH THE APPLICABLE
INSTALLATION CODE BY A PERSON FAMILIAR WITH THE CONSTRUCTION AND OPERATION OF THE PRODUCT
AND THE HAZARDS INVOLVED.
Make certain power is OFF before installing or maintaining fixture. No user serviceable
WARNING:
parts inside.
ARMSV24
24" Arm with swivel for WPLED10, WPLED13 and WPLED20 (Fixtures sold separately).
CAUTION: Follow mounting orientation restrictions on fixture instructions.
1. Remove Door from fixture. Remove junction box or mounting plate from fixture. Connect leads from ARMSV24 to
fixture. Make the wiring connections inside of the fixture using UL approved connectors.
2. Mount the Swivel Adaptor to the fixture with four Housing Screws. Use the provided nuts and washers for two of the
four Housing Screws as shown below.
3. Replace Door. Tighten all door screws and check seal of door gasket.
4. Make supply wiring connections in recessed junction box with UL approved connectors. Mount Wall Plate and fixture
assembly to wall with hardware appropriate for your mounting surface.
5. Tighten set screws and all other screws and hardware. To ensure weatherproof seal, apply weatherproof silicone
sealant to all unused plugs and holes and around the edge of the Wall Plate. Use Teflon tape on Arm threads or use
weatherproof silicone sealant between Arm and Swivel Adaptor.
Wall Plate
ARMSV24 IN 0712
Arm24
LPACK
(not supplied)
Swivel
Adaptor
Housing
Screws (4)
Note: These instructions do not cover all details or variations
in equipment nor do they provide for every possible situation
during installation, operation or maintenance.
.
Door
Advertisement
