Pottery Barn CLASSIC RATTAN QUEEN Assembly Instructions

•
Please read all instructions before beginning assembly.
• For ease of assembly, assembly by two people is recommended.
•
Save all packing materials until assembly is complete to avoid accidentally discarding smaller parts or
hardware.
BOX 1
Parts Included:
•
(1) Head Board
•
(1) Foot Board
•
(1) Hardware pack including:
- (4) Wood Screws for Angle Bracket
- (64) Wood Screws for Slats
- (6) Screws for Center Leg
BOX 2
Parts Included:
•
(2) Side Rails
•
(2) Slat rolls with 16 slats each
•
(1) Center Rail
•
(3) Center Legs

Tools Required:

•
Phillips Screwdriver (not included)
Assembly Instructions:
1. Place the Headboard and Footboard near the desired location for the bed. See figure 1.
2. Locate the groove of each post, where the pin is inserted.
3. Align one side rail with hook at end to post.
Insert the hook of the side rail into the groove of the post, slowly
push downward to tighten the hook to the pin. Figure 2.
4. Repeat steps 2 and 3 until both side rails are completely
attached.
CLASSIC RATTAN QUEEN, KING & CAL KING BED
Assembly Instructions
Figure 1
Headboard
Footboard
Figure 2
Post
Side Rail
Hook
Pin