8412-Ead, 9117-Mmc, 9117-Mmd, 9179-Mhc, Or 9179-Mhd Locations - IBM Power Series Handbook

Note: These labels apply to system units only.
Table 23. Prefixes of location code labels for system units
Prefix Description
A Air-moving device
C Card connector
D Device
E Electrical
L Logical path SAS target
N Horizontal placement for an empty rack location
P Planar
T Port
U Unit
V Virtual planar
W Worldwide unique ID
X EIA value for an empty rack location
Y Firmware FRU
Worldwide unique identifier
The location code label for the worldwide unique identifier consists of the prefix W followed by a
maximum of 16 uppercase hexadecimal digits with no leading zeros. A location code might not consist of
a worldwide unique identifier. When present, the worldwide unique identifier location label follows the
location label of the resource that interfaces with the resource that has the worldwide unique identifier,
usually a port.

8412-EAD, 9117-MMC, 9117-MMD, 9179-MHC, or 9179-MHD locations

The following table contains location codes for the parts that make up the server.
The following diagrams show field replaceable unit (FRU) layouts in the system. Use these diagrams with
the following tables.
Front
76
Finding parts, locations, and addresses
Example
Fan, blower
IOP, IOA, DIMM, processor card
Diskette, control panel
Battery, power supply, ac charger
Integrated drive electronics (IDE) address, Fibre
Channel LUN
System backplane