Hardware Reset; Technical Specifications - Simons Voss Technologies WaveNet Lock-Node Cable Quick Manual

8. Hardware reset

LED
flashes red/green
8. Hardware reset
You can reset WaveNet Manager-enabled LockNodes (re-
cognisable by WNM in the article number):
1. Disconnect the LockNode from the power supply or re-
move the batteries.
2. Wait for about 20 seconds.
3. Press and hold the Init button.
4. Reconnect the power supply or replace the batteries.
LED lights up constantly red.
9
5. Release the Init button while the LED is constantly red.
9 All WaveNet information in the LockNode is deleted.
You can re-integrate the LockNode into your WaveNet (see
WaveNet manual).

9. Technical specifications

Dimensions
Power supply
Meaning
Data is transferred.
37xØ53 mm, suitable for
standard flush-mounted box
(DIN 49073 part 1)
6 V to 24 V
DC
32 / 124 | EN
, ~15 mA
DC