Limited Warranty; Technical Specifications - SHURflo HeavyDuty Advantage BIB 94-360-05 Manual

LIMITED WARRANTY

SHURflo warrants new Beverage Gas Pumps to be free from material and workmanship defects (under normal use and service)
for a period of three (3) years from the date of manufacture. An additional 30 days may be added to allow for storage and transit
delays. In any event, the total limited warranty period will not exceed thirty-seven (37) months from date of manufacture.
The limited warranty will not apply to pumps that were improperly installed, misapplied, or not suitable with components of other
manufacturers. The limited warranty will not apply to pumps subjected to fluids that are incompatible with pump materials, or
pumps operated by a contaminated air supply. SHURflo will not warrant any pump that is physically damaged or modified
outside the SHURflo factory.
All SHURflo gas pumps should be returned to the authorized distributor where they were purchased. SHURflo's obligation under
this warranty policy is limited to repair or replacement. Pumps found not defective (under the terms of this limited warranty) are
subject to charges to be paid by the returnee for the testing and packaging of "sanitized & tested good" units.
No credit or labor allowances will be given to the returnee for pumps returned as defective. Warranty replacements will be
shipped on a freight allowed basis. SHURflo reserves the right to choose the method of transportation.
This limited warranty is in lieu of all other warranties, expressed or implied, and no other person is authorized to give any other
warranty or assume obligation or liability on SHURflo's behalf. SHURflo shall not be liable for any labor, damage or other
expense, nor shall SHURflo be liable for any indirect, incidental or consequential damages of any kind incurred by the reason of
the use or sale of any defective product or part. This limited warranty covers beverage products distributed within the United
States of America. Other countries should consult with the distributor for any deviation from this document.

TECHNICAL SPECIFICATIONS

DESIGN:
MATERIALS OF CONSTRUCTION:
POWER SOURCE:
OPERATING PRESSURE:
MAXIMUM STROKE RATE:
DISPLACEMENT:
AUTOMATIC SOLD-OUT:
TEMPERATURE LIMITS:
WEIGHT:
AVAILABLE* LIQUID FITTINGS:
AVAILABLE* CO2 / AIR / EXHAUST FITTINGS:
*Pump assembly part number determines fitting configuration.
Metric fittings dimensions are approximation to U.S. inch size.
«
ISO Certified Facility
SHURflo «
5900 Katella Ave.
Cypress, CA 90630
(800) 854-3218 (562) 795-5200
FAX (562) 795-7564
Shipping/UPS: 5900 Katella Ave., Suite B
SHURflo reserves the right to update specifications, prices, or make substitutions.
Twin Chamber Double Diaphragm
Polypropylene, EDPM, Santoprene, 300 Stainless Steel,
FDA sanctioned, NSF Listed, CE, S-K
CO 2 , Nitrogen, or compressed filtered air
20 psi. . [1.4 bar] / 85 psi.
MIN
2 strokes /sec; intermittent duty (consult factory)
3.4 oz. per cycle [101 cc]
20–24"Hg. [68–81kPa] activation (wet). No reset required.
34° – 120°F [1.1° – 49°C]
1 lb. [.45 kg]
1 / 4 " [6mm], 3 / 8 " [10mm], and 1 / 2 " [13mm] barb elbows, straights; and 90°
configurations; plastic or stainless.
John Guest ® straight tube; plastic.
1 / 4 " [6mm] barb elbows or "T"s; plastic or brass; with internal check valve.
1 / 4 " [6mm] barb elbows or straights; plastic (no c/valve).
John Guest ® straight tube; plastic (no c/valve).
Muffler assembly
R
a WICOR Company
SHURflo East
52748 Park Six Court
Elkhart, IN 46514-5427
((800) 762-8094
(219) 262-0478
FAX (219) 264-2169
. [5.8 bar] static
MAX
SHURflo Ltd.
Unit 5 Sterling Park
Gatwick Road, Crawley
West Sussex, RH10 2QT
United Kingdom
+44 1293 424000
FAX +44 1293 421880