Technical Data - BMW MINI Wallbox Plus Installation Instructions Manual

Technical data

Electrical data
Charging mode:
Cable feed:
Connection cross-section:
Supply terminals:
Temperature rating of supply terminals:
Rated current (configurable connection values):
Mains voltage:
Mains frequency:
Mains configuration:
Overvoltage category:
Rated short-time current resistance:
Fuse (in the domestic installation):
DC residual current monitoring:
Ventilation during charging:
50
Mode 3 as per IEC 61851-1
Surface-mounted or flush-mounted
Minimum cross-section (depending on the cable
and type of installation):
- 5 x 2.5 mm² (16 A nominal current)
- 5 x 6.0 mm² (32 A nominal current)
Connection cable:
- rigid (min.-max.): 0.2 – 16 mm²
- flexible (min.-max.): 0.2 – 16 mm²
- AWG (min.-max.): 24 – 6
- flexible (min.-max.) with wire-end ferrule
with/without plastic sleeve:
0.25 – 10 / 0.25 – 10 mm²
105 °C
10 A, 13 A, 16 A, 20 A, 25 A or 32 A
3-phase or 1-phase
220-240 V ~
220/380 - 240/415 V 3N~
50 Hz/60 Hz
TT/TN/IT
III as per EN 60664
< 10 kA effective value to EN 61439-1
The fusing must comply with the local
regulations depending on the socket/cable
version (see rating plate).
≤ 6 mA DC (integral)
Not supported