24
Mounting the Inverter
Mounting the Inverter
The inverter is supplied with a mounting bracket.
NOTE
Make sure the mounting surface or structure can support the weight of the
inverter and bracket, and make sure that it spans the width of the bracket.
CAUTION!
HEAVY OBJECT. To avoid muscle strain or back injury, use proper lifting
techniques, and if required - a lifting aid.
CAUTION!
SolarEdge inverters and power optimizers can be installed at a minimum
distance of 50 m/ 164 ft from the shoreline of an ocean or other saline
environment, as long as there are no direct salt water splashes on the inverter or
power optimizer.
1. Determine the inverter mounting location, on a wall, stud framing or pole. It is
recommended to mount the inverter in a location protected from direct sunlight.
2. To allow proper heat dissipation, maintain the following minimum clearance areas
between the inverter and other objects:
If installing a single inverter:
At least 20 cm (8") from the top and bottom of the inverter.
10 cm (4") from the right and left of the inverter. For easy access to the fans,
a larger clearance is recommended.
If installing multiple inverters, following the guidelines for three
phase inverters in
Mounting.
Figure 8: Mounting bracket
Clearance Guidelines for Multiple Inverter
StorEdge Three Phase Inverter Installation Guide MAN-01-00648-1.1