Interface Operation; By Factory Infotainment Buttons; By Keypad; Specifications - r.LiNK RL2-MMI3G-Q3 Manual

3. Interface operation

3.1.

By factory infotainment buttons

The NAV button and the MODE button of the MMI are used to execute interface functions.
MMI3G
Longress MODE or NAV button to switch the video-source
MMI3G+ and A1 vehicles
Longpress NAVI button of the steering-wheel to switch the video-source.
Each press will switch to the next enabled input. If all inputs are enabled the order is:

Factory video RGB-in
Inputs which are not enabled are skipped.
Switchover by vehicle keys isn't possible in all vehicles. In some vehicles the external
keypad must be used.
3.2.

By keypad

Alternatively or additionally to the factory infotainment buttons the interface's external
keypad can be used to switch the enabled inputs.

4. Specifications

BATT/ACC range
Stand-by power drain
Video input
Video input formats
Temperature range
Dimensions video-box
Dimensions CAN-box
Version 12.01.2018
 
video IN1 video IN2
 
factory video ...
7V - 25V
<10mA
0.7V – 1V
PAL/NTSC
-40°C to +85°C
113 x 22 x 92 mm (W x H x D)
73 x 22 x 30 mm (W x H x D)
RL2-MMI3G-xxx