Connection To The Head-Unit - r.LiNK RL2-MMI3G-Q3 Manual

2.5.

Connection to the head-unit

Remove head-unit (navigation computer/radio).
Connect female 8pin Micro-Fit connector of the 4pin HSD LVDS cable to male 8pin
Micro-Fit connector of the video-interface.
Remove female 4pin HSD LVDS connector from the rear of the head-unit and connect
it to the male 4pin HSD LVDS connector of the video-interface.
Note: The marked lug of the female 4pin HSD LVDS connector of the vehicle harness
has to be cut off! Colour of the female 4pin HSD LVDS connector on vehicles with 8"
monitor is grey.
Connect female 4pin connector of the HSD LVDS interface cable to the male 4pin HSD
LVDS connector of the head-unit.
Version 12.01.2018 RL2-MMI3G-xxx