Exercise: Create a program using Teach-in
•
Create the program P011 LABEL
•
Add and activate the 1
•
stitch length: 5mm
•
needle thread tension: 25%
•
sewing foot stroke: 3 mm
•
"Record" 10 points for each seam section segment (by sewing)
•
Adjust the parameters for the seam sections:
Section 1
• Seg.End Mode: Stop
On, Thread Trim Off,
Needle Up Off,
Foot lifted On
• start tack: Off
•
• end tack: Off
•
Set the global parameters of the program:
•
Program name: P011 LABEL
st
seam section and set the basic parameters:
Section 2
• Seg.End Mode: Stop
On, Thread Trim Off,
Needle Up Off,
Foot lifted On
• start tack: Off
• end tack: Off
Section 3
• Seg.End Mode: Stop
On, Thread Trim Off,
Needle Up Off, Foot
lifted On
• start tack: Off
• end tack: Off
Section 4
• Seg.End Mode: Stop
On, Thread Trim Off,
Needle Up Off, Foot
lifted Off
• start tack: Off
• end tack: On
63