Advertisement
Exercise: Create a Simple Program
Create a program consisting of one seam section only
•
Create program P007 PROGRAM SIMPLE
•
Add a segment
•
Set the seam section parameters:
•
stitch length 4 mm
•
sewing foot stroke 3 mm
•
needle thread tension 25
•
Seg.End Modes:
Stop active On, Thread trim active On, Needle Up inactive Off, Foot lifted inactive Off
•
start tack: active On
•
end tack: active On
•
Foot lifted: inactive Off
•
Adjust the global parameters of the program:
•
Program Name: P007 PROGRAM SIMPLE
•
Bobbin: Mode Software, counter 500 points, MotorStop active On, ResetNeces active On
•
DailyPieces: On, Incr.
•
Sew the program (test with material)
•
Modify any parameter settings in the edit mode if necessary
55
Advertisement
