Advertisement
Creating a program using the Teach-in function
1.
Create a new program
2.
Press the Teach-in
3.
Automatic creation of 1
4.
Adjust basic parameters: stitch length, needle thread tension, sewing foot
pressure, sewing foot stroke
5.
Press the pedal and complete the seam section up to the desired position on
the material.
nd
6.
Add a 2
seam section and set the basic parameters.
7.
Press the pedal and complete the 2
another new sections (repeat steps 6 and 7).
8.
Terminate program: Push the pedal fully back.
The program switches to Edit mode.
9.
If necessary, set additional parameters for all seam sections and the global
program parameters.
10. Quit with ESC button.
button.
st
section
nd
seam section. If necessary add
62
Advertisement
