Motorola T4512 Manual page 9

6864237V01_EN.fm Page 9 Monday, May 15, 2006 2:36 PM
Use and Care
To clean your radio:
• Use a soft damp cloth.
• Do not immerse in water.
• Do not use alcohol or cleaning solutions.
If your radio gets wet:
• Turn it off and remove batteries.
• Dry with soft cloth.
• Battery contacts may be wiped with a dry, lint-free cloth.
• Do not use until completely dry.
Specifications
Channels 8
Codes 38
Operating Frequency 446.00625-446.09375 MHz
Talk Range Up to 5 kilometres
Power Source 3 AAA alkaline batteries
Type Designation T4512
Transmitter Power 0.5 ERP
(Watts)
Modulation Type Phase (Angle)
Channel Spacing (kHz) 12.5
Warranty Information
The authorized Motorola dealer or retailer where you
purchased your Motorola two-way radio and/or original
accessories will honour a warranty claim and/or
provide warranty service.
Please return your radio to your dealer or retailer to
claim your warranty service. Do not return your radio to
Motorola.
In order to be eligible to receive warranty service, you
must present your receipt of purchase or a comparable
substitute proof of purchase bearing the date of
purchase. The two-way radio should also clearly
display the serial number. The warranty will not apply if
the type or serial numbers on the product have been
altered, deleted, removed, or made illegible.
What Is Not Covered By The Warranty
• Defects or damage resulting from use of the Product in
other than its normal and customary manner or by not
following the instructions in this user manual.
• Defects or damage from misuse, accident or neglect.
• Defects of damage from improper testing, operation,
maintenance, adjustment, or any alteration or
modification of any kind.
• Breakage or damage to aerials unless caused directly
by defects in material or workmanship.
• Products disassembled or repaired in such a manner as
to adversely affect performance or prevent adequate
inspection and testing to verify any warranty claim.
• Defects or damage due to range.
• Defects or damage due to moisture, liquid or spills.
• All plastic surfaces and all other externally exposed
parts that are scratched or damaged due to normal use.
9