Citizen E260 Abbreviated Instruction

English
• This watch is solar-powered. Expose the dial to light and use it sufficiently charged.
• To see details of charging time, specifications and operations, refer to the instruction manual:
Component identification
Hour
hand
Button
C
Chronograph
12
hour hand
9
Alarm hand
6
Alarm
crown
Second hand
• Actual appearance may differ from the illustration.
• The crown has two positions when pulling it out.
• Refer also to our web page for detail of usage of the
scale and bezel on the watch.
(http://www.citizenwatch-global.com/support/
pdf/enhanced/e.pdf)
Setting the time and date indication
Setting the time
1.
Pull the crown out to position
0 second.
The second hand stops.
2.
Rotate the crown to set the time.
• Change of date indication shows it just became AM. Take care the time set
is AM or PM.
• Move the hands 4 or 5 minutes forward and move them back to the right
time to set the time more precisely.
3.
Push the crown in to position
time source.
The second hand starts moving.
Setting the date indication
• Date indication adjustment is required on the first days of March, May, July,
October and December.
1.
Pull the crown out to position
2.
Rotate the crown counterclockwise to set the date indication.
• The crown turns freely and the date does not change if the crown is turned
to the right.
3.
Push the crown in to position
E260 Abbreviated instruction
Chronograph
second hand
60
60
Button
12
60
3 45 15
30
Button
120
Alarm
indicator
hand
when the second hand points
2
in accordance with a reliable
0
.
1
to finish the procedure.
0
Indicating the time of another place
You can set the dual time hand to indicate time of another place.
1.
Set the crown to position
2.
Press and release the upper left button
Dual time hand
• Each time you press the button, the dual time hand moves by 1 hour.
B
• The dual time hand returns to "0" just after proceeding to "24".
Minute hand
3.
Pull the crown out to position
0 second.
Crown
The second hand stops and the dual time hand points to the current minute.
• While setting the minute of dual time, the dual time hand indicates the
Chronograph
minute in 5-minute increments as follows.
minute hand
A
Date
indication
Crown's position
0 5 10
The dual time hand shows 25 minutes in this figure.
0 1 2
4.
Press and release the upper left button
• Each time you press the button, the dual time hand moves by 5 minutes.
• The dual time hand returns to "0" just after proceeding to "24".
5.
Push the crown in to position
time source.
The second hand starts moving and the dual time hands returns to time
indication.
E260 instruction manual
or .
0 1
when the second hand points
2
12
Minute when setting the
15 20 25 30 35 40 45 50 55
dual time
in accordance with a reliable
0
to adjust the time.
C
to adjust the minute.
C