Citizen E210 Abbreviated Instruction

English
• This watch is solar-powered. Expose the dial to light and use it sufficiently charged.
• To see details of charging time, specifications and operations, refer to the instruction manual:
Component identification
• Models with the crown at the 3 o'clock position
Chronograph second
hand
Hour hand
Button (recessed
C
button)
Chronograph hour hand
9
Alarm hand
ON
Alarm crown
Second hand
• Models with the crown at the 12 o'clock position
Button
A
Chronograph second
hand
Hour hand
Power reserve
indication hand
Chronograph hour
hand
Button (recessed
C
button)
• Actual appearance may differ from the illustrations.
• The crown has two positions when pulling it out.
• Refer also to our web page for detail of usage of the
scale and bezel on the watch.
(http://www.citizenwatch-global.com/support/pdf/
enhanced/e.pdf)
E210 Abbreviated instruction
Power reserve indication
hand
Minute hand
60
Button
CHARGE
Chronograph minute
12 60
hand
Crown
3 45 15
Alarm indicator hand
OFF
Button
120
Date indication
Crown
Button
B
Chronograph minute
hand
Date indication
Minute hand
Second hand
Alarm hand
Alarm indicator hand
Alarm crown
Checking the power reserve
You can see current power reserve level by referring to the power reserve
indication hand. Use the watch with sufficiently charged.
Level
Indication
(Models with the
A
crown at the 3
o'clock position)
Indication
(Models with the
crown at the 12
o'clock position)
Duration (approx.)
B
Meaning
Setting the time
1.
Pull the crown out to position
0 second.
The second hand stops.
2.
Rotate the crown to set the time.
• Change of date indication shows it just became AM. Take care the time set
is AM or PM.
• Move the hands 4 or 5 minutes forward and move them back to the right
time to set the time more precisely.
3.
Push the crown in to position
time source to finish the procedure.
The second hand starts moving.
Setting the date indication
• Do not adjust the date indication while the watch shows 9:00 PM ‒ 1:00 AM.
Otherwise, the date indication may change incorrectly thereafter.
• Date indication adjustment is required on the first days of March, May, July,
October and December.
Crown's position
1.
Pull the crown out to position
2.
Rotate the crown counterclockwise to set the date indication.
3.
Push the crown in to position
0 1 2
E210 instruction manual
3 2
CHARGE CHARGE
8 ‒ 7 months 7 ‒ 5 months
Power reserve is Power reserve is
sufficient. OK.
OK for normal use.
when the second hand points
2
in accordance with a reliable
0
.
1
to finish the procedure.
0
1 CHARGE
CHARGE CHARGE
5 months ‒ 7 7 days or
days shorter
Insufficient
Power reserve is
charge warning
getting low.
has started.
Charge immediately.
1/2