Advertisement
Automatic Mode: Setting a program
1 |
To set the Year / Date / Hour on the thermostat
Press
for more than 3 seconds ->PRO is displayed
Turn the centralscroll wheel to the rightuntil you see dAt
then confirm bypressing the central
Press the central scroll wheel G between each input (Year, Date, Month and Day) to confirm it. Do not touch
anything for 1 minute, the device returns to home page. The setting of the Date/Time is done.
2 |
To set a heating program
By default your appliance includes the following standard program:
To activate this program just put the thermostat to the Auto position
by pressing
If you want to create your ownprogram:
Press
> 3 seconds ->PRO is displayed. Confirm by pressing the central scroll wheel G.
dAy is displayed:
The scroll wheel G allows you to select any day of the week, every day of the week or only weekends. Confirm
your choice by pressing the scroll wheel G.
A default temperature is displayed (for the starting period).
Set the desired temperature with the scroll wheel G then confirm by pressing the scroll wheel
G.
The time is displayed, change it to indicate the start time of heating then confirm with the central scroll wheel G.
. Select the desired temperature with the scroll wheel G and confirm the choice by pressing it.
Repeat this procedure until all temperature phases are recorded until the end of the chosen period. When you
are satisfied with the settings do not touch the thermostat for 1 minute. The home page will be displayed.
For further information, refer to the manual supplied with the appliance. .
Page 8
scroll wheel G
G
www.degxel.com
Advertisement
