Advertisement
Quick Links
DEGXEL
OPERATING INSTRUCTIONS
For Infrared Heaters
Metal, Mirror, Glass, Picture, Towel heaters
SUMMARY
Safety instructions
Technical specifications
Installation of the heater
Temperature regulation and control
Guarantee
IMPORTANT
Before use, read this manual carefully and keep it for later use
Degxel™ Heaters - All rights reserved - www.degxel.com
Page 2
Page 3
Page 4
Page 6
Advertisement
Summary of Contents for DEGXEL 210W
-
Page 1: Operating Instructions
Page 2 Technical specifications Page 3 Installation of the heater Page 4 Temperature regulation and control Page 6 Guarantee IMPORTANT Before use, read this manual carefully and keep it for later use Degxel™ Heaters - All rights reserved - www.degxel.com... - Page 2 Repeat this step before each use of the appliance. For example, if the power cord seems to be damaged, contact your retailer or the Degxel™ technical centre to proceed to its replacement. Do not connect the appliance if the plug or the power cord is defective.
- Page 3 TECHNICAL SPECIFICATIONS The Degxel™ heaters are infrared heaters in accordance to the CE & ROHS (230V/50Hz) standards. They are certified by the German inspection body TUV/GS. They are divided into several ranges: Mirror heaters Glass heaters Picture heaters Extra flat heaters...
- Page 4 INSTALLATION & MOUNTING OF THE HEATER This appliance is an infrared heater dedicated exclusively to housing heating, as recommended below. The Degxel™ heaters can be installed in all interior parts of the housing. Overview Before connecting the appliance check that no anomalies are shown.
- Page 5 Manually unscrew the 4 white plastic pads of the heater until they touch the wall firmly. Check that the heater is blocked. Center distance between the 2 pads of your Degxel™ heater Thickness = 1,2 cm...
- Page 6 TEMPERATURE REGULATION AND CONTROL Description Rapide des étapes de fixation du radiateur : (voir manuel séparé) The Degxel™ heaters do not have any built-in thermostat. There are several reasons for this. Find more explana- tions, advices and controlling solutions on our website www.degxel.com.
- Page 7 Press the button again for about 5 seconds until the LED flashes quickly, indicating the unit has resumed its factory settings. Release the button. You can then re-create a new connection with the thermostat following the procedure described previously. For further information, refer to the manual supplied with the appliance. www.degxel.com Page 7...
- Page 8 Repeat this procedure until all temperature phases are recorded until the end of the chosen period. When you are satisfied with the settings do not touch the thermostat for 1 minute. The home page will be displayed. For further information, refer to the manual supplied with the appliance. . Page 8 www.degxel.com...
- Page 9 2 departures from the Live (L) and 2 departures from Neutral (N) for connect- ing on the receiver and the heater. Do not forget to connect the ground wire (green-yellow) of the heater with the ground wire of the power supply (not present in this diagram). www.degxel.co.uk/tutorial WIRELESS PROGRAMMABLE...
- Page 10 STAGE 1 | PAIRING THE ROOM THERMOSTAT WITH A RECEIVER This step is also described in the following video: www.degxel.co.uk/tutorial Do not hesitate to consult it if you have operating problems. In order for the thermostat to communicate with the heater it’s necessary to perform this step.
- Page 11 You just need to switch the thermostat in anti-freezing mode to stop it. # Important note : In case of malfunctioning please read: www.degxel.co.uk/tutorial this will solve your problem. To use your thermostat, please refer to the English manual supplied with the thermostat.
- Page 12 WARRANTY and CUSTOMER SERVICE Thank you for having purchased a Degxel™ Heat4all™ product. For your safety, before using a heater make sure you have read all the instructions about the safety, installation and use. All our heaters are manufactured with great care and undergo rigorous quality checks before their commercialization.