F) Music Control - Renkforce Joystick 1359969 Operating Instructions Manual

Copying a programme
• Press and hold the PROGRAM/PAUSE button (3) until the respective LED flashes.
• Select the desired programme to be copied with the BANK (9) buttons.
• Press the MIDI/REC button (5).
• Select the programme into which the programme is to be copied with the BANK buttons (9).
• Press the MUSIC/BANK COPY button (4).
• Press and hold the PROGRAM/PAUSE button (3) to leave the programming mode again.
Deleting all scenes
When deleting all scenes, they are permanently removed and can not be recovered anymore.
• Switch off the DMX controller.
• Press and hold the BANK (9) button with the arrow downwards and the PROGRAM/PAUSE (3) button
while switching the DMX controller back on.
• Keep the buttons pressed until all LEDs light up.
• All scenes are deleted.
• Press and hold the PROGRAM/PAUSE button (3) to leave the programming mode again.

f) Music control

Sound to light control will only work when the effect light device receives a music signal either
through the integrated microphone or the AUDIO port (20). When a music signal is received, the
device will control the light effects according to the music.
• Press the MUSIC/BANK COPY button (4) to switch sound to light control on or off.
• When sound to light control is activated, the MUSIC display appears in the mode display (8).
• The activated programmes and chasers are now controlled in time with the music.
46