E) Copying And Deleting Scenes And Programmes - Renkforce Joystick 1359969 Operating Instructions Manual

Deleting all chasers
When deleting all chasers, they are permanently removed and can not be recovered anymore.
The different scenes and programmes, however, are not deleted.
• Switch off the DMX controller.
• Press and hold the BANK (9) button with the arrow downwards and the AUTO/DEL button (7) while
switching the DMX controller back on.
• Keep the buttons pressed until all LEDs light up.
• All chasers are deleted.

e) Copying and deleting scenes and programmes

With this function, programming programmes or chasers is made easier, because programmed scenes or
whole programmes can be transferred directly.
Copying a scene
• Press and hold the PROGRAM/PAUSE button (3) until the respective LED flashes.
• Push the button BLACKOUT (11), to deactivate the blackout mode and visually check the scenes.
• Select the desired programme in which the scene to be copied is located with the button BANK (9).
• Select the scene to be copied with the SCENES buttons (2).
• Press the MIDI/REC button (5).
• Select the programme into which the scene is to be copied with the BANK buttons (9).
• Press the desired SCENES (2) button under which you want to save the copied scene in the new bank.
• All LEDs will light up briefly, and the scene is copied to the desired position.
• Press and hold the PROGRAM/PAUSE button (3) to leave the programming mode again.
Deleting a scene
• Press and hold the PROGRAM/PAUSE button (3) until the respective LED flashes.
• Select the desired programme with the BANK buttons (9).
• Select the scene to be deleted with the SCENES buttons (2).
• Push and hold the AUTO/DEL button (7) and push the SCENES (2) button for the scene to be deleted.
• Press and hold the PROGRAM/PAUSE button (3) to leave the programming mode again.
45