Installing Or Re-Installing The Batteries - ELEKTRA DIGI2 Installation Manual

1. INSTALLING OR RE-INSTALLING THE BATTERIES

ELEKTRA DIGI2 (DIGI2p) is equipped with a warning light to indicate when the
batteries need replacing. As soon as this indicator lights up at the bottom right-
hand side of the display panel, replace the batteries (use two 1.5V AA R6 alkaline
batteries - life is approximately 18 months): The device remains programmed for 60
seconds while batteries are being replaced.
Before beginning the programming of the device, please
slide cover down and press RES with the tip of a pen.
5