ELEKTRA DIGI2 Installation Manual page 12

DIGI2/DIGI2p
Selection of an existing P1, P2 or P3 programme for a day of the
week.
Attention:
In programming mode all modifications are automatically validated.
Example - P2 for Wednesday
a) Press the PROG P1-4 button to go into programming mode. The N of the
programme assigned to the day flashes on the right-hand side of the display
panel.
b) Press the DAYS 1-7 button until the pointer
to programme (Wednesday in our example).
c) Press the PROG P1-P4 button until the P2 programme number flashes in the
right side of the screen.
d) Press the OK button to validate. The following day is automatically proposed.
12
appears under the day you wish
o