Table of Contents
Advertisement
Replacement BaseIO Card Configuration
Complete the following steps to configure the replacement BaseIO card:
1.
Configure eth0 with the proper static IP address.
2.
Configure BIOS-assisted RAID
For more information, refer to Managing BIOS-assisted RAID on an SGI UV 300H Server,
SGI publication number 007-6454-00x.
Note:
4
It is not necessary to flash any firmware on the BaseIO card.
Replacing a BaseIO Card in an SGI® UV™ 300H Server
007-6442-002
Advertisement
Table of Contents
Need help?
Do you have a question about the UV 300H and is the answer not in the manual?
Questions and answers