Method 2: Connect To A Wps Router - Philips DS9800WS User Manual

3
Press WI-FI SETUP on the back of the
main speaker.
» The following dialog box is displayed.
4
Tap ALLOW (allow) to share your Wi-Fi
settings with DS9800WS.
» After a while, the WI-FI STATUS
indicator on the back of the main
speaker turns solid green, and the unit
beeps.
» DS9800WS is connected to your
existing home Wi-Fi network
successfully.
Method 2: Connect to a WPS
router
Note
•
Before you press any button on DS9800WS, make sure
that DS9800WS has been booted up successfully (see
'Turn DS9800WS on' on page 9).
1
Press the WPS button on your home Wi-Fi
router.
WPS
2
Shortly after step 1, press WI-FI SETUP on
the back of the main speaker.
» The WI-FI STATUS indicator blinks
yellow, green and red alternately.
» Within 2 minutes, the WI-FI STATUS
indicator turns solid green, and the unit
beeps.
» DS9800WS is connected to your
home Wi-Fi network successfully.
WIFI
SETUP
EN 11