Table of Contents
Advertisement
3 Get started
Always follow the instructions in this chapter in
sequence.
If you contact Philips, you will be asked for the
model and serial number of this apparatus. The
model number and serial number are on the
bottom of the apparatus. Write the numbers
here:
Model No. __________________________
Serial No. ___________________________
Connect power
This docking speaker can be powered on by
either AC power or batteries.
Battery power
Caution
•
Risk of explosion! Keep batteries away from heat,
sunshine or fire. Never discard batteries in fire.
•
Batteries contain chemical substances, so they should
be disposed of properly.
•
Danger of explosion if battery is incorrectly replaced.
Replace only with the same or equivalent type.
1
Open the battery compartment.
2
Insert 4 x 1.5 V AA batteries (not supplied)
with correct polarity (+/-) as indicated.
3
Close the battery compartment.
4
EN
AC power
Caution
•
Risk of product damage! Make sure that the power
supply voltage corresponds to the voltage printed on
the back of the unit.
•
Risk of electric shock! When you unplug the AC
adaptor, always pull the plug from the socket. Never
pull the cord.
•
Before connecting the AC adaptor, make sure that you
have completed all other connections.
Turn on
Press
to turn the docking speaker on.
Advertisement
Table of Contents
